[clamav-users] File::Scan::ClamAV
Chris
cpollock at embarqmail.com
Tue Jul 22 15:33:01 UTC 2014
On Tue, 2014-07-22 at 13:53 +0100, Anthony DIckinson wrote:
> On 22/07/14 03:47, Chris wrote:
> > On Sun, 2014-07-20 at 12:52 -0400, Scott Kitterman wrote:
> >> On Sunday, July 20, 2014 07:27:25 Chris wrote:
> >>> On Sun, 2014-07-20 at 13:32 +0200, Matus UHLAR - fantomas wrote:
> >>>> On 19.07.14 21:38, Chris wrote:
> >>>>> Finally I'm about finished with setting up my Ubuntu 14.04 system and
> >>>>> getting everything setup the way it was in the old Mandriva system. I
> >>>>> have both SA and ClamAV running now but I'm missing a module,
> >>>>> File::Scan::ClamAV to interface with SA. Have tried multiple times to
> >>>>> install via CPAN, I'm posted the output at pastebin -
> >>>>> http://pastebin.com/bdurgL6X
> >>>>>
> >>>>> Any ideas anyone? ClamAV has been installed via the Ubuntu software
> >>>>> installer if it makes a difference.
> >>>> why not using ClamAV with your MTA directly?
> >>> Good morning Matus, I have postfix installed and running, however, the
> >>> only mail that goes through it are the outputs of cronjobs sent to me
> >>> and the forwarding of spam to the address spam at uce.gov . That is
> >>> probably overkill but I installed it so long ago on the old machine that
> >>> it was just 2nd nature to install it again. The mail from my ISP comes
> >>> in via Fetchmail > Procmail and is run through SA prior to getting
> >>> tossed to my inbox.
> >> I use clamsmtp (also from the Ubuntu package archive) with postfix, but I
> >> suspect you could configure it as a transparent proxy between fetchmail and
> >> procmail. Then the virus scanning would be handled further upstream.
> >>
> >> Scott K
> > I looked at this Scott but I don't think I'm techno-savy enough to try
> > it. Any other ideas on how to install this module? After looking at the
> > 't' folder in the source pkg and the errors it looks like it's looking
> > for something it can't find but then again I'm not a perl programmer so
> > I can't be positive.
> >
> > Thanks
> > Chris
> >
>
> Chris,
>
> Looks like the tests for this module are out of date or not 100%
> accurate. You can get the tests to complete by fudging.... Warning: Hack
> alert!!!
>
>
> #step 1
> sudo cpan
> install File::Scan::ClamAV
> (this will fail)
> look File::Scan::ClamAV
> (this puts you in the build directory for this module within cpan) e.g.:
>
> cpan[2]> look File::Scan::ClamAV
> Running look for module 'File::Scan::ClamAV'
>
> Trying to open a subshell in the build directory...
> Working directory is /root/.cpan/build/File-Scan-ClamAV-1.91-O_dSGE
> xxxx at xxxx:.cpan/build/File-Scan-ClamAV-1.91-O_dSGE#
>
> #step 2
> cd t
> (go into the test directory)
> (in mkconf.pl change):
> my $dir = cwd;
> to
> my $dir = '/tmp/;
>
> #step 3
> In 01ping.t, 02reload.t, 03quit.t, 04scan.t and 05streamscan.t files:
> 1) change all references to 'clamsock' to '/tmp/clamsock' (should be 3
> places in each file: in the loop, during File::Scan::ClamAV
> instantiation and unlink)
> 2) change the for loop count from 10 to 60 (as clamd takes a while to
> load) so,
> for (1..10)
> to
> for (1..60)
>
> #step 4
> cd ..
> (back to the root build dir)
>
> # step 5
> (run make test to run the test suite) e.g.:
>
> xxxx at xxxx:.cpan/build/File-Scan-ClamAV-1.91-O_dSGE# make test
> PERL_DL_NONLAZY=1 CLAMD_PATH=/usr/sbin /usr/bin/perl
> "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib',
> ' blib/arch')" t/*.t
> t/00basic.t ....... ok
> t/01ping.t ........ ok
> t/02reload.t ...... ok
> t/03quit.t ........ ok
> t/04scan.t ........ ok
> t/05streamscan.t .. ok
> t/pod-coverage.t .. skipped: Test::Pod::Coverage 1.00 required for
> testing POD coverage
> t/pod.t ........... skipped: Test::Pod 1.00 required for testing POD
> All tests successful.
> Files=8, Tests=27, 187 wallclock secs ( 0.09 usr 0.04 sys + 174.55
> cusr 4.58 csys = 179.26 CPU)
> Result: PASS
> xxxx at xxxx:.cpan/build/File-Scan-ClamAV-1.91-O_dSGE#
>
> # step 6
> (run make install to install the modules)
> make install
>
> # step 7
> exit
> quit
>
> Hope this helps,
>
> Ant
> _______________________________________________
> Help us build a comprehensive ClamAV guide:
> https://github.com/vrtadmin/clamav-faq
> http://www.clamav.net/support/ml
Hmm, made the changes as noted:
root at localhost:~/.cpan/build/File-Scan-ClamAV-1.91-N3ENzf# make test
PERL_DL_NONLAZY=1 CLAMD_PATH=/usr/sbin /usr/bin/perl
"-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib',
'blib/arch')" t/*.t
t/00basic.t ....... ok
t/01ping.t ........ ERROR: LOCAL: Socket file /clamsock could not be
bound: Permission denied
t/01ping.t ........ 1/3 # Failed test 2 in t/01ping.t at line 26
# t/01ping.t line 26 is: ok($av->ping);
t/01ping.t ........ Failed 1/3 subtests
t/02reload.t ...... ERROR: LOCAL: Socket file /clamsock could not be
bound: Permission denied
^Cmake: *** [test_dynamic] Interrupt
root at localhost:~/.cpan/build/File-Scan-ClamAV-1.91-N3ENzf# make test
PERL_DL_NONLAZY=1 CLAMD_PATH=/usr/sbin /usr/bin/perl
"-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib',
'blib/arch')" t/*.t
t/00basic.t ....... ok
t/01ping.t ........ ERROR: LOCAL: Socket file /clamsock could not be
bound: Permission denied
t/01ping.t ........ 1/3 # Failed test 2 in t/01ping.t at line 26
# t/01ping.t line 26 is: ok($av->ping);
t/01ping.t ........ Failed 1/3 subtests
t/02reload.t ...... ERROR: LOCAL: Socket file /clamsock could not be
bound: Permission denied
t/02reload.t ...... 1/3 # Failed test 2 in t/02reload.t at line 25
# t/02reload.t line 25 is: ok($av->reload);
t/02reload.t ...... Failed 1/3 subtests
t/03quit.t ........ ERROR: LOCAL: Socket file /clamsock could not be
bound: Permission denied
t/03quit.t ........ 1/4 # Failed test 2 in t/03quit.t at line 31
# t/03quit.t line 31 is: ok($av->quit);
t/03quit.t ........ Failed 1/4 subtests
t/04scan.t ........ ERROR: LOCAL: Socket file /clamsock could not be
bound: Permission denied
t/04scan.t ........ 1/8 # Test 4 got: "" (t/04scan.t at line 36)
# Expected: "1" (Didn't
detect /home/chris/.cpan/build/File-Scan-ClamAV-1.91-N3ENzf/testfiles/clamavtest)
# t/04scan.t line 36 is: ok(exists($results{"$testdir/clamavtest"}), 1,
"Didn't detect $testdir/clamavtest");
# Test 5 got: "" (t/04scan.t at line 37)
# Expected: "1" (Didn't
detect /home/chris/.cpan/build/File-Scan-ClamAV-1.91-N3ENzf/testfiles/clamavtest.zip)
# t/04scan.t line 37 is:
ok(exists($results{"$testdir/clamavtest.zip"}), 1, "Didn't detect
$testdir/clamavtest.zip");
# Test 6 got: "" (t/04scan.t at line 38)
# Expected: "1" (Didn't
detect /home/chris/.cpan/build/File-Scan-ClamAV-1.91-N3ENzf/testfiles/clamavtest.gz)
# t/04scan.t line 38 is: ok(exists($results{"$testdir/clamavtest.gz"}),
1, "Didn't detect $testdir/clamavtest.gz");
t/04scan.t ........ Failed 3/8 subtests
t/05streamscan.t .. ERROR: LOCAL: Socket file /clamsock could not be
bound: Permission denied
t/05streamscan.t .. 1/8 # Test 5 got: <UNDEF> (t/05streamscan.t at line
43)
# Expected: "FOUND"
# t/05streamscan.t line 43 is: ok($ans, 'FOUND');
# Test 6 got: <UNDEF> (t/05streamscan.t at line 44)
# Expected: "ClamAV-Test-Signature"
# t/05streamscan.t line 44 is: ok($vir, 'ClamAV-Test-Signature');
t/05streamscan.t .. Failed 2/8 subtests
t/pod-coverage.t .. ok
t/pod.t ........... ok
Test Summary Report
-------------------
t/01ping.t (Wstat: 0 Tests: 3 Failed: 1)
Failed test: 2
t/02reload.t (Wstat: 0 Tests: 3 Failed: 1)
Failed test: 2
t/03quit.t (Wstat: 0 Tests: 4 Failed: 1)
Failed test: 2
t/04scan.t (Wstat: 0 Tests: 8 Failed: 3)
Failed tests: 4-6
t/05streamscan.t (Wstat: 0 Tests: 8 Failed: 2)
Failed tests: 5-6
Files=8, Tests=29, 301 wallclock secs ( 0.04 usr 0.01 sys + 56.64 cusr
1.95 csys = 58.64 CPU)
Result: FAIL
Failed 5/8 test programs. 8/29 subtests failed.
make: *** [test_dynamic] Error 255
I have /tmp under:
root at localhost:/# cd root
root at localhost:/root# ls -l
total 8
drwxr-xr-x 2 root root 4096 Jul 15 07:49 Desktop
drwxr-xr-x 2 root root 4096 Jul 22 10:22 tmp
root at localhost:/root# cd ..
root at localhost:/# ls -l
total 129
drwxr-xr-x 2 root root 4096 Jul 12 20:32 bin
drwxr-xr-x 4 root root 1024 Jul 17 08:22 boot
drwxrwxr-x 2 root root 4096 Jul 12 19:52 cdrom
drwxr-xr-x 16 root root 4300 Jul 21 22:30 dev
drwxr-xr-x 152 root root 12288 Jul 21 22:30 etc
-rw-r--r-- 1 root root 4777 Jan 11 2008 GPG.KEY
drwxr-xr-x 3 root root 4096 Jul 12 19:53 home
lrwxrwxrwx 1 root root 33 Jul 17 08:22 initrd.img ->
boot/initrd.img-3.13.0-32-generic
lrwxrwxrwx 1 root root 33 Jul 12 20:33 initrd.img.old ->
boot/initrd.img-3.13.0-30-generic
drwxr-xr-x 23 root root 4096 Jul 12 19:58 lib
drwxr-xr-x 2 root root 4096 Apr 16 20:21 lib64
drwx------ 2 root root 16384 Jul 12 19:45 lost+found
drwxr-xr-x 3 root root 4096 Jul 12 21:05 media
drwxr-xr-x 2 root root 4096 Apr 10 17:12 mnt
drwxr-xr-x 7 root root 4096 Jul 16 15:39 nonexisting
drwxr-xr-x 2 root root 4096 Apr 16 20:21 opt
dr-xr-xr-x 239 root root 0 Jul 20 17:45 proc
-rw-r--r-- 1 root root 108 Jul 14 09:13 razor-agent.log
drwx------ 21 root root 4096 Jul 22 10:22 root
drwxr-xr-x 28 root root 880 Jul 21 07:37 run
drwxr-xr-x 2 root root 12288 Jul 12 20:28 sbin
drwxr-xr-x 2 root root 4096 Apr 16 20:21 srv
dr-xr-xr-x 13 root root 0 Jul 20 17:45 sys
drwxrwxrwt 12 root root 20480 Jul 22 10:26 tmp
drwxr-xr-x 12 root root 4096 Jul 14 20:50 usr
drwxr-xr-x 17 root root 4096 Jul 16 13:37 var
lrwxrwxrwx 1 root root 30 Jul 17 08:22 vmlinuz ->
boot/vmlinuz-3.13.0-32-generic
lrwxrwxrwx 1 root root 30 Jul 12 20:33 vmlinuz.old ->
boot/vmlinuz-3.13.0-30-generic
-rw-r--r-- 1 root root 2165 Jul 13 14:07 webmin-setup.out
and to be sure I made one in my /home/chris folder:
drwxrwxr-x 2 chris chris 4096 Jul 22 10:31 tmp
So, where did I go wrong?
Thanks
Chris
More information about the clamav-users
mailing list