[clamav-users] "LogClean yes"

domenico madouno at gmail.com
Sun Jan 14 18:29:58 UTC 2018


Hi Micah,

thanks for your reply. This is my configuration file 
/etc/clam.d/scan.conf (if I do "ps -ef |grep clam", I have 
"/usr/sbin/clamd -c /etc/clam.d/scan.conf --foreground=yes):

Domenico

-------------------------------------------------------------------------------------------------------------

##
## Example config file for the Clam AV daemon
## Please read the clamd.conf(5) manual before editing this file.
##


# Comment or remove the line below.
#Example

# Uncomment this option to enable logging.
# LogFile must be writable for the user running daemon.
# A full path is required.
# Default: disabled
LogFile /var/log/clamd.scan

# By default the log file is locked for writing - the lock protects against
# running clamd multiple times (if want to run another clamd, please
# copy the configuration file, change the LogFile variable, and run
# the daemon with --config-file option).
# This option disables log file locking.
# Default: no
#LogFileUnlock yes

# Maximum size of the log file.
# Value of 0 disables the limit.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
# in bytes just don't use modifiers. If LogFileMaxSize is enabled, log
# rotation (the LogRotate option) will always be enabled.
# Default: 1M
#LogFileMaxSize 2M

# Log time with each message.
# Default: no
#LogTime yes

# Also log clean files. Useful in debugging but drastically increases the
# log size.
# Default: no
#LogClean yes

# Use system logger (can work together with LogFile).
# Default: no
LogSyslog yes

# Specify the type of syslog messages - please refer to 'man syslog'
# for facility names.
# Default: LOG_LOCAL6
#LogFacility LOG_MAIL

# Enable verbose logging.
# Default: no
#LogVerbose yes

# Enable log rotation. Always enabled when LogFileMaxSize is enabled.
# Default: no
#LogRotate yes

# Log additional information about the infected file, such as its
# size and hash, together with the virus name.
#ExtendedDetectionInfo yes

# This option allows you to save a process identifier of the listening
# daemon (main thread).
# Default: disabled
#PidFile /var/run/clamd.scan/clamd.pid

# Optional path to the global temporary directory.
# Default: system specific (usually /tmp or /var/tmp).
#TemporaryDirectory /var/tmp

# Path to the database directory.
# Default: hardcoded (depends on installation options)
#DatabaseDirectory /var/lib/clamav

# Only load the official signatures published by the ClamAV project.
# Default: no
#OfficialDatabaseOnly no

# The daemon can work in local mode, network mode or both.
# Due to security reasons we recommend the local mode.

# Path to a local socket file the daemon will listen on.
# Default: disabled (must be specified by a user)
LocalSocket /var/run/clamd.scan/clamd.sock

# Sets the group ownership on the unix socket.
# Default: disabled (the primary group of the user running clamd)
#LocalSocketGroup virusgroup

# Sets the permissions on the unix socket to the specified mode.
# Default: disabled (socket is world accessible)
#LocalSocketMode 660

# Remove stale socket after unclean shutdown.
# Default: yes
#FixStaleSocket yes

# TCP port address.
# Default: no
#TCPSocket 3310

# TCP address.
# By default we bind to INADDR_ANY, probably not wise.
# Enable the following to provide some degree of protection
# from the outside world. This option can be specified multiple
# times if you want to listen on multiple IPs. IPv6 is now supported.
# Default: no
#TCPAddr 127.0.0.1

# Maximum length the queue of pending connections may grow to.
# Default: 200
#MaxConnectionQueueLength 30

# Clamd uses FTP-like protocol to receive data from remote clients.
# If you are using clamav-milter to balance load between remote clamd 
daemons
# on firewall servers you may need to tune the options below.

# Close the connection when the data size limit is exceeded.
# The value should match your MTA's limit for a maximum attachment size.
# Default: 25M
#StreamMaxLength 10M

# Limit port range.
# Default: 1024
#StreamMinPort 30000
# Default: 2048
#StreamMaxPort 32000

# Maximum number of threads running at the same time.
# Default: 10
#MaxThreads 20

# Waiting for data from a client socket will timeout after this time 
(seconds).
# Default: 120
#ReadTimeout 300

# This option specifies the time (in seconds) after which clamd should
# timeout if a client doesn't provide any initial command after connecting.
# Default: 5
#CommandReadTimeout 5

# This option specifies how long to wait (in miliseconds) if the send 
buffer is full.
# Keep this value low to prevent clamd hanging
#
# Default: 500
#SendBufTimeout 200

# Maximum number of queued items (including those being processed by 
MaxThreads threads)
# It is recommended to have this value at least twice MaxThreads if 
possible.
# WARNING: you shouldn't increase this too much to avoid running out  of 
file descriptors,
# the following condition should hold:
# MaxThreads*MaxRecursion + (MaxQueue - MaxThreads) + 6< RLIMIT_NOFILE 
(usual max is 1024)
#
# Default: 100
#MaxQueue 200

# Waiting for a new job will timeout after this time (seconds).
# Default: 30
#IdleTimeout 60

# Don't scan files and directories matching regex
# This directive can be used multiple times
# Default: scan all
#ExcludePath ^/proc/
#ExcludePath ^/sys/

# Maximum depth directories are scanned at.
# Default: 15
#MaxDirectoryRecursion 20

# Follow directory symlinks.
# Default: no
#FollowDirectorySymlinks yes

# Follow regular file symlinks.
# Default: no
#FollowFileSymlinks yes

# Scan files and directories on other filesystems.
# Default: yes
#CrossFilesystems yes

# Perform a database check.
# Default: 600 (10 min)
#SelfCheck 600

# Execute a command when virus is found. In the command string %v will
# be replaced with the virus name.
# Default: no
#VirusEvent /usr/local/bin/send_sms 123456789 "VIRUS ALERT: %v"
VirusEvent /root/clamvault.sh %v

# Run as another user (clamd must be started by root for this option to 
work)
# Default: don't drop privileges
###User clamscan
User root
# Initialize supplementary group access (clamd must be started by root).
# Default: no
AllowSupplementaryGroups yes

# Stop daemon when libclamav reports out of memory condition.
#ExitOnOOM yes

# Don't fork into background.
# Default: no
#Foreground yes

# Enable debug messages in libclamav.
# Default: no
#Debug yes

# Do not remove temporary files (for debug purposes).
# Default: no
#LeaveTemporaryFiles yes

# Permit use of the ALLMATCHSCAN command. If set to no, clamd will reject
# any ALLMATCHSCAN command as invalid.
# Default: yes
#AllowAllMatchScan no

# Detect Possibly Unwanted Applications.
# Default: no
#DetectPUA yes

# Exclude a specific PUA category. This directive can be used multiple 
times.
# See https://github.com/vrtadmin/clamav-faq/blob/master/faq/faq-pua.md for
# the complete list of PUA categories.
# Default: Load all categories (if DetectPUA is activated)
#ExcludePUA NetTool
#ExcludePUA PWTool

# Only include a specific PUA category. This directive can be used multiple
# times.
# Default: Load all categories (if DetectPUA is activated)
#IncludePUA Spy
#IncludePUA Scanner
#IncludePUA RAT

# In some cases (eg. complex malware, exploits in graphic files, and 
others),
# ClamAV uses special algorithms to provide accurate detection. This option
# controls the algorithmic detection.
# Default: yes
#AlgorithmicDetection yes

# This option causes memory or nested map scans to dump the content to disk.
# If you turn on this option, more data is written to disk and is available
# when the LeaveTemporaryFiles option is enabled.
#ForceToDisk yes

# This option allows you to disable the caching feature of the engine. By
# default, the engine will store an MD5 in a cache of any files that are
# not flagged as virus or that hit limits checks. Disabling the cache will
# have a negative performance impact on large scans.
# Default: no
#DisableCache yes

##
## Executable files
##

# PE stands for Portable Executable - it's an executable file format used
# in all 32 and 64-bit versions of Windows operating systems. This 
option allows
# ClamAV to perform a deeper analysis of executable files and it's also
# required for decompression of popular executable packers such as UPX, FSG,
# and Petite. If you turn off this option, the original files will still be
# scanned, but without additional processing.
# Default: yes
#ScanPE yes

# Certain PE files contain an authenticode signature. By default, we check
# the signature chain in the PE file against a database of trusted and
# revoked certificates if the file being scanned is marked as a virus.
# If any certificate in the chain validates against any trusted root, but
# does not match any revoked certificate, the file is marked as whitelisted.
# If the file does match a revoked certificate, the file is marked as virus.
# The following setting completely turns off authenticode verification.
# Default: no
#DisableCertCheck yes

# Executable and Linking Format is a standard format for UN*X executables.
# This option allows you to control the scanning of ELF files.
# If you turn off this option, the original files will still be scanned, but
# without additional processing.
# Default: yes
#ScanELF yes

# With this option clamav will try to detect broken executables (both PE and
# ELF) and mark them as Broken.Executable.
# Default: no
#DetectBrokenExecutables yes


##
## Documents
##

# This option enables scanning of OLE2 files, such as Microsoft Office
# documents and .msi files.
# If you turn off this option, the original files will still be scanned, but
# without additional processing.
# Default: yes
#ScanOLE2 yes

# With this option enabled OLE2 files with VBA macros, which were not
# detected by signatures will be marked as "Heuristics.OLE2.ContainsMacros".
# Default: no
#OLE2BlockMacros no

# This option enables scanning within PDF files.
# If you turn off this option, the original files will still be scanned, but
# without decoding and additional processing.
# Default: yes
#ScanPDF yes

# This option enables scanning within SWF files.
# If you turn off this option, the original files will still be scanned, but
# without decoding and additional processing.
# Default: yes
#ScanSWF yes

# This option enables scanning xml-based document files supported by 
libclamav.
# If you turn off this option, the original files will still be scanned, but
# without additional processing.
# Default: yes
#ScanXMLDOCS yes

# This option enables scanning of HWP3 files.
# If you turn off this option, the original files will still be scanned, but
# without additional processing.
# Default: yes
#ScanHWP3 yes


##
## Mail files
##

# Enable internal e-mail scanner.
# If you turn off this option, the original files will still be scanned, but
# without parsing individual messages/attachments.
# Default: yes
#ScanMail yes

# Scan RFC1341 messages split over many emails.
# You will need to periodically clean up 
$TemporaryDirectory/clamav-partial directory.
# WARNING: This option may open your system to a DoS attack.
#       Never use it on loaded servers.
# Default: no
#ScanPartialMessages yes

# With this option enabled ClamAV will try to detect phishing attempts 
by using
# signatures.
# Default: yes
#PhishingSignatures yes

# Scan URLs found in mails for phishing attempts using heuristics.
# Default: yes
#PhishingScanURLs yes

# Always block SSL mismatches in URLs, even if the URL isn't in the 
database.
# This can lead to false positives.
#
# Default: no
#PhishingAlwaysBlockSSLMismatch no

# Always block cloaked URLs, even if URL isn't in database.
# This can lead to false positives.
#
# Default: no
#PhishingAlwaysBlockCloak no

# Detect partition intersections in raw disk images using heuristics.
# Default: no
#PartitionIntersection no

# Allow heuristic match to take precedence.
# When enabled, if a heuristic scan (such as phishingScan) detects
# a possible virus/phish it will stop scan immediately. Recommended, 
saves CPU
# scan-time.
# When disabled, virus/phish detected by heuristic scans will be 
reported only at
# the end of a scan. If an archive contains both a heuristically detected
# virus/phish, and a real malware, the real malware will be reported
#
# Keep this disabled if you intend to handle "*.Heuristics.*" viruses
# differently from "real" malware.
# If a non-heuristically-detected virus (signature-based) is found first,
# the scan is interrupted immediately, regardless of this config option.
#
# Default: no
#HeuristicScanPrecedence yes


##
## Data Loss Prevention (DLP)
##

# Enable the DLP module
# Default: No
#StructuredDataDetection yes

# This option sets the lowest number of Credit Card numbers found in a file
# to generate a detect.
# Default: 3
#StructuredMinCreditCardCount 5

# This option sets the lowest number of Social Security Numbers found
# in a file to generate a detect.
# Default: 3
#StructuredMinSSNCount 5

# With this option enabled the DLP module will search for valid
# SSNs formatted as xxx-yy-zzzz
# Default: yes
#StructuredSSNFormatNormal yes

# With this option enabled the DLP module will search for valid
# SSNs formatted as xxxyyzzzz
# Default: no
#StructuredSSNFormatStripped yes


##
## HTML
##

# Perform HTML normalisation and decryption of MS Script Encoder code.
# Default: yes
# If you turn off this option, the original files will still be scanned, but
# without additional processing.
#ScanHTML yes


##
## Archives
##

# ClamAV can scan within archives and compressed files.
# If you turn off this option, the original files will still be scanned, but
# without unpacking and additional processing.
# Default: yes
#ScanArchive yes

# Mark encrypted archives as viruses (Encrypted.Zip, Encrypted.RAR).
# Default: no
#ArchiveBlockEncrypted no


##
## Limits
##

# The options below protect your system against Denial of Service attacks
# using archive bombs.

# This option sets the maximum amount of data to be scanned for each 
input file.
# Archives and other containers are recursively extracted and scanned up 
to this
# value.
# Value of 0 disables the limit
# Note: disabling this limit or setting it too high may result in severe 
damage
# to the system.
# Default: 100M
#MaxScanSize 150M

# Files larger than this limit won't be scanned. Affects the input file 
itself
# as well as files contained inside it (when the input file is an archive, a
# document or some other kind of container).
# Value of 0 disables the limit.
# Note: disabling this limit or setting it too high may result in severe 
damage
# to the system.
# Default: 25M
#MaxFileSize 30M

# Nested archives are scanned recursively, e.g. if a Zip archive 
contains a RAR
# file, all files within it will also be scanned. This options specifies how
# deeply the process should be continued.
# Note: setting this limit too high may result in severe damage to the 
system.
# Default: 16
#MaxRecursion 10

# Number of files to be scanned within an archive, a document, or any other
# container file.
# Value of 0 disables the limit.
# Note: disabling this limit or setting it too high may result in severe 
damage
# to the system.
# Default: 10000
#MaxFiles 15000

# Maximum size of a file to check for embedded PE. Files larger than 
this value
# will skip the additional analysis step.
# Note: disabling this limit or setting it too high may result in severe 
damage
# to the system.
# Default: 10M
#MaxEmbeddedPE 10M

# Maximum size of a HTML file to normalize. HTML files larger than this 
value
# will not be normalized or scanned.
# Note: disabling this limit or setting it too high may result in severe 
damage
# to the system.
# Default: 10M
#MaxHTMLNormalize 10M

# Maximum size of a normalized HTML file to scan. HTML files larger than 
this
# value after normalization will not be scanned.
# Note: disabling this limit or setting it too high may result in severe 
damage
# to the system.
# Default: 2M
#MaxHTMLNoTags 2M

# Maximum size of a script file to normalize. Script content larger than 
this
# value will not be normalized or scanned.
# Note: disabling this limit or setting it too high may result in severe 
damage
# to the system.
# Default: 5M
#MaxScriptNormalize 5M

# Maximum size of a ZIP file to reanalyze type recognition. ZIP files larger
# than this value will skip the step to potentially reanalyze as PE.
# Note: disabling this limit or setting it too high may result in severe 
damage
# to the system.
# Default: 1M
#MaxZipTypeRcg 1M

# This option sets the maximum number of partitions of a raw disk image 
to be scanned.
# Raw disk images with more partitions than this value will have up to 
the value number
# partitions scanned. Negative values are not allowed.
# Note: setting this limit too high may result in severe damage or 
impact performance.
# Default: 50
#MaxPartitions 128

# This option sets the maximum number of icons within a PE to be scanned.
# PE files with more icons than this value will have up to the value 
number icons scanned.
# Negative values are not allowed.
# WARNING: setting this limit too high may result in severe damage or 
impact performance.
# Default: 100
#MaxIconsPE 200

# This option sets the maximum recursive calls for HWP3 parsing during 
scanning.
# HWP3 files using more than this limit will be terminated and alert the 
user.
# Scans will be unable to scan any HWP3 attachments if the recursive 
limit is reached.
# Negative values are not allowed.
# WARNING: setting this limit too high may result in severe damage or 
impact performance.
# Default: 16
#MaxRecHWP3 16

# This option sets the maximum calls to the PCRE match function during 
an instance of regex matching.
# Instances using more than this limit will be terminated and alert the 
user but the scan will continue.
# For more information on match_limit, see the PCRE documentation.
# Negative values are not allowed.
# WARNING: setting this limit too high may severely impact performance.
# Default: 10000
#PCREMatchLimit 20000

# This option sets the maximum recursive calls to the PCRE match 
function during an instance of regex matching.
# Instances using more than this limit will be terminated and alert the 
user but the scan will continue.
# For more information on match_limit_recursion, see the PCRE documentation.
# Negative values are not allowed and values > PCREMatchLimit are 
superfluous.
# WARNING: setting this limit too high may severely impact performance.
# Default: 5000
#PCRERecMatchLimit 10000

# This option sets the maximum filesize for which PCRE subsigs will be 
executed.
# Files exceeding this limit will not have PCRE subsigs executed unless 
a subsig is encompassed to a smaller buffer.
# Negative values are not allowed.
# Setting this value to zero disables the limit.
# WARNING: setting this limit too high or disabling it may severely 
impact performance.
# Default: 25M
#PCREMaxFileSize 100M


##
## On-access Scan Settings
##

# Enable on-access scanning. Currently, this is supported via fanotify.
# Clamuko/Dazuko support has been deprecated.
# Default: no
ScanOnAccess yes

# Set the  mount point to be scanned. The mount point specified, or the 
mount point
# containing the specified directory will be watched. If any directories 
are specified,
# this option will preempt the DDD system. This will notify only. It can 
be used multiple times.
# (On-access scan only)
# Default: disabled
#OnAccessMountPath /
#OnAccessMountPath /home/user

# Don't scan files larger than OnAccessMaxFileSize
# Value of 0 disables the limit.
# Default: 5M
#OnAccessMaxFileSize 10M

# Set the include paths (all files inside them will be scanned). You can 
have
# multiple OnAccessIncludePath directives but each directory must be added
# in a separate line. (On-access scan only)
# Default: disabled
#OnAccessIncludePath /home
#OnAccessIncludePath /students
OnAccessIncludePath /root/Incoming

# Set the exclude paths. All subdirectories are also excluded.
# (On-access scan only)
# Default: disabled
#OnAccessExcludePath /home/bofh

# With this option you can whitelist specific UIDs. Processes with these 
UIDs
# will be able to access all files.
# This option can be used multiple times (one per line).
# Default: disabled
#OnAccessExcludeUID 0

# Toggles dynamic directory determination. Allows for recursively 
watching include paths.
# (On-access scan only)
# Default: no
#OnAccessDisableDDD yes

# Modifies fanotify blocking behaviour when handling permission events.
# If off, fanotify will only notify if the file scanned is a virus,
# and not perform any blocking.
# (On-access scan only)
# Default: no
#OnAccessPrevention yes

# Toggles extra scanning and notifications when a file or directory is 
created or moved.
# Requires the  DDD system to kick-off extra scans.
# (On-access scan only)
# Default: no
#OnAccessExtraScanning yes

##
## Bytecode
##

# With this option enabled ClamAV will load bytecode from the database.
# It is highly recommended you keep this option on, otherwise you'll 
miss detections for many new viruses.
# Default: yes
#Bytecode yes

# Bytecode mode
#
# This option has been set to 'ForceInterpreter' in Fedora due to
# security concerns by default.  You might need to enable the
# 'antivirus_use_jit' SELinux boolean after setting this option to
# the more efficient 'ForceJIT' value.
#
# Default: ForceInterpreter
#ByteCodeMode ForceInterpreter

# Set bytecode security level.
# Possible values:
#       None - no security at all, meant for debugging. DO NOT USE THIS 
ON PRODUCTION SYSTEMS
#         This value is only available if clamav was built with 
--enable-debug!
#       TrustSigned - trust bytecode loaded from signed .c[lv]d files,
#                insert runtime safety checks for bytecode loaded from 
other sources
#       Paranoid - don't trust any bytecode, insert runtime checks for all
# Recommended: TrustSigned, because bytecode in .cvd files already has 
these checks
# Note that by default only signed bytecode is loaded, currently you can 
only
# load unsigned bytecode in --enable-debug mode.
#
# Default: TrustSigned
#BytecodeSecurity TrustSigned

# Set bytecode timeout in miliseconds.
#
# Default: 5000
# BytecodeTimeout 1000

##
## Statistics gathering and submitting
##

# Enable statistical reporting.
# Default: no
#StatsEnabled yes

# Disable submission of individual PE sections for files flagged as malware.
# Default: no
#StatsPEDisabled yes

# HostID in the form of an UUID to use when submitting statistical 
information.
# Default: auto
#StatsHostID auto

# Time in seconds to wait for the stats server to come back with a response
# Default: 10
#StatsTimeout 10




Il 14/01/2018 15:45, Micah Snyder (micasnyd) ha scritto:
> Hi Domenico, Can you share your clamd.conf file? I did a quick test 
> with clamd, clamdscan and verified the behavior. If you scan a 
> directory, you should see “OK” or “FOUND” for each file that is 
> scanned in your log file (typically /tmp/clamd.log). Micah Snyder 
> Software Engineer Talos Cisco Systems, Inc. On Jan 12, 2018, at 11:55 
> AM, domenico <madouno at gmail.com<mailto:madouno at gmail.com>> wrote: Hi 
> there, my name is Domenico and I'm new in this list. I know Clamav for 
> many years but as simple user. Now I need to deploy a particular 
> application that divides infected files from clean files. Shortly I 
> have a directory to scan using the On access function, if the incoming 
> file is infected it will be moved to "vault" directory, if not it will 
> be moved to "outgoing" directory. Move infected file is easy using the 
> log file information and a script. Move the clean file is not easy for 
> now. I tried to set the option "LogClean" to YES but It not works. No 
> output on messages log nor to clamav log. Someone know why and can 
> help me? I'm probably wrong (certainly). Thanks very much to all, 
> Domenico _______________________________________________ clamav-users 
> mailing list 
> clamav-users at lists.clamav.net<mailto:clamav-users at lists.clamav.net> 
> http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users Help us 
> build a comprehensive ClamAV guide: 
> https://github.com/vrtadmin/clamav-faq 
> http://www.clamav.net/contact.html#ml 
> _______________________________________________ clamav-users mailing 
> list clamav-users at lists.clamav.net 
> http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users Help us 
> build a comprehensive ClamAV guide: 
> https://github.com/vrtadmin/clamav-faq 
> http://www.clamav.net/contact.html#ml




More information about the clamav-users mailing list