[clamav-users] About ClamAV 0.101.3 builds on AIX6.1

Tsutomu Oyamada oyamada at promark-inc.com
Tue Aug 20 23:31:37 EDT 2019


Hi Micah,

I'm sorry for the slow response.
It was another issue on AIX6.1, but your advice was helpful in AIX7.1.
I was able to build correctly in my environment.

Thank you so much.

Regards,
Tsutomu Oyamada

On Tue, 13 Aug 2019 16:14:48 +0000
"Micah Snyder \(micasnyd\) via clamav-users" <clamav-users at lists.clamav.net> wrote:

> Hi Tsutomu,
> 
> It looks like you are seeing a similar issue to what these folks had when building libtool on Solaris:
> https://forums.gentoo.org/viewtopic-t-1080858-start-0.html
> 
> Here the user solved it by changing the NM environment variable: 
> https://lists.gnu.org/archive/html/libtool/2012-11/msg00014.html
> 
> Ex:
>     NM=/usr/xpg4/bin/nm\ \-p
>     export NM
> 
> For Solaris 10 in the past, we've found that if you're not using the OpenCSW tools you need to use gnm (gnu's nm utility).  The same is probably true for AIX.  
> Please install gnm and give this a try (I've made the assumption that it'll install to /usr/local.  Of course adjust the path as needed. I'm not sure if the "-p" argument is required:
> 
>     ./configure NM=/usr/local/bin/gnm AR="/usr/bin/ar -X64" LDFLAGS="-maix64 -Wl,-bbigtoc -lbsd -lclamav" CFLAGS="-maix64" CXXFLAGS="-maix64" LDFLAGS="-maix64 -Wl,-bbigtoc -lbsd" --prefix=/usr/lib/clamav --exec-prefix=/usr/lib/clamav --bindir=/usr/lib/clamav --sbindir=/usr/lib/clamav --sysconfdir=/etc/clamav --libdir=/usr/lib/clamav --datarootdir=/usr/lib/clamav --with-dbdir=/usr/lib/clamav --disable-clamav --enable-shared --disable-static --disable-zlib-vcheck --with-pcre --with-openssl=/opt/freeware --enable-strni
> 
> Regards,
> Micah	
> 
> ?On 8/12/19, 10:04 PM, "clamav-users on behalf of Tsutomu Oyamada" <clamav-users-bounces at lists.clamav.net on behalf of oyamada at promark-inc.com> wrote:
> 
>     Hi, all
>     
>     I am trying to build ClamAV 0.101.3 on AIX6.1.
>     I did the following procedure, but it fails to make.
>     What can I do?
>     Excuse me in a long sentence below.
>     
>     1. Download clamav-0.101.3.tar.gz package.
>     2. Extract package.
>     3. Execute configure
>     
>     AR="/usr/bin/ar -X64" LDFLAGS="-maix64 -Wl,-bbigtoc -lbsd -lclamav"
>     ./configure CFLAGS="-maix64" CXXFLAGS="-maix64" LD
>     FLAGS="-maix64 -Wl,-bbigtoc -lbsd" --prefix=/usr/lib/clamav --exec-prefix=/usr/lib/clamav --bindir=/usr/lib/clamav --sbindir=/us
>     r/lib/clamav --sysconfdir=/etc/clamav --libdir=/usr/lib/clamav --datarootdir=/usr/lib/clamav --with-dbdir=/usr/lib/clamav --disa
>     ble-clamav --enable-shared --disable-static --disable-zlib-vcheck --with-pcre --with-openssl=/opt/freeware --enable-strni
>     
>     checking for g++... g++
>     checking whether the C++ compiler works... yes
>     checking for C++ compiler default output file name... a.out
>     checking for suffix of executables...
>     checking whether we are cross compiling... no
>     checking for suffix of object files... o
>     checking whether we are using the GNU C++ compiler... yes
>     checking whether g++ accepts -g... yes
>     checking build system type... powerpc-ibm-aix6.1.0.0
>     checking host system type... powerpc-ibm-aix6.1.0.0
>     checking target system type... powerpc-ibm-aix6.1.0.0
>     creating target.h - canonical system defines
>     checking for a BSD-compatible install... config/install-sh -c
>     checking whether build environment is sane... yes
>     checking for a thread-safe mkdir -p... config/install-sh -c -d
>     checking for gawk... no
>     checking for mawk... no
>     checking for nawk... nawk
>     checking whether make sets $(MAKE)... yes
>     checking for style of include used by make... GNU
>     checking whether make supports nested variables... yes
>     checking whether UID '0' is supported by ustar format... yes
>     checking whether GID '0' is supported by ustar format... yes
>     checking how to create a ustar tar archive... gnutar
>     checking dependency style of g++... gcc3
>     checking whether make supports nested variables... (cached) yes
>     checking for gcc... gcc
>     checking whether we are using the GNU C compiler... yes
>     checking whether gcc accepts -g... yes
>     checking for gcc option to accept ISO C89... none needed
>     checking whether gcc understands -c and -o together... yes
>     checking dependency style of gcc... gcc3
>     checking the archiver (/usr/bin/ar -X64) interface... ar
>     checking how to run the C preprocessor... gcc -E
>     checking for grep that handles long lines and -e... /usr/bin/grep
>     checking for egrep... /usr/bin/grep -E
>     checking for ANSI C header files... yes
>     checking for sys/types.h... yes
>     checking for sys/stat.h... yes
>     checking for stdlib.h... yes
>     checking for string.h... yes
>     checking for memory.h... yes
>     checking for strings.h... yes
>     checking for inttypes.h... yes
>     checking for stdint.h... yes
>     checking for unistd.h... yes
>     checking minix/config.h usability... no
>     checking minix/config.h presence... no
>     checking for minix/config.h... no
>     checking whether it is safe to define __EXTENSIONS__... yes
>     checking how to print strings... print -r
>     checking for a sed that does not truncate output... /usr/bin/sed
>     checking for fgrep... /usr/bin/grep -F
>     checking for ld used by gcc... /usr/bin/ld
>     checking if the linker (/usr/bin/ld) is GNU ld... no
>     checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
>     checking the name lister (/usr/bin/nm -B) interface... BSD nm
>     checking whether ln -s works... yes
>     checking the maximum length of command line arguments... 786432
>     checking how to convert powerpc-ibm-aix6.1.0.0 file names to powerpc-ibm-aix6.1.0.0 format... func_convert_file_noop
>     checking how to convert powerpc-ibm-aix6.1.0.0 file names to toolchain format... func_convert_file_noop
>     checking for /usr/bin/ld option to reload object files... -r
>     checking for objdump... no
>     checking how to recognize dependent libraries... pass_all
>     checking for dlltool... no
>     checking how to associate runtime and link libraries... print -r --
>     checking for archiver @FILE support... no
>     checking for strip... strip
>     checking for ranlib... ranlib
>     checking command to parse /usr/bin/nm -B output from gcc object... failed
>     checking for sysroot... no
>     checking for a working dd... /usr/bin/dd
>     checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
>     checking for mt... mt
>     checking if mt is a manifest tool... no
>     checking for dlfcn.h... yes
>     checking which variant of shared library versioning to provide... aix
>     checking for objdir... .libs
>     checking if gcc supports -fno-rtti -fno-exceptions... no
>     checking for gcc option to produce PIC... -fPIC -DPIC
>     checking if gcc PIC flag -fPIC -DPIC works... yes
>     checking if gcc static flag -static works... no
>     checking if gcc supports -c -o file.o... yes
>     checking if gcc supports -c -o file.o... (cached) yes
>     checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
>     checking dynamic linker characteristics... AIX lib.a(lib.so.V)
>     checking how to hardcode library paths into programs... immediate
>     checking for shl_load... no
>     checking for shl_load in -ldld... no
>     checking for dlopen... yes
>     checking whether a program can dlopen itself... yes
>     checking whether a statically linked program can dlopen itself... yes
>     checking whether stripping libraries is possible... no
>     checking if libtool supports shared libraries... yes
>     checking whether to build shared libraries... yes
>     checking whether to build static libraries... no
>     checking how to run the C++ preprocessor... g++ -E
>     checking for ld used by g++... /usr/bin/ld
>     checking if the linker (/usr/bin/ld) is GNU ld... no
>     checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
>     checking for g++ option to produce PIC... -fPIC -DPIC
>     checking if g++ PIC flag -fPIC -DPIC works... yes
>     checking if g++ static flag -static works... no
>     checking if g++ supports -c -o file.o... yes
>     checking if g++ supports -c -o file.o... (cached) yes
>     checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
>     checking dynamic linker characteristics... AIX lib.a(lib.so.V)
>     checking how to hardcode library paths into programs... immediate
>     checking what extension is used for runtime loadable modules... .so
>     checking what variable specifies run-time module search path... LIBPATH
>     checking for the default library search path... /lib /usr/lib
>     checking for library containing dlopen... none required
>     checking for dlerror... yes
>     checking for shl_load... (cached) no
>     checking for shl_load in -ldld... (cached) no
>     checking for dld_link in -ldld... no
>     checking for _ prefix in compiled symbols... no
>     checking whether deplibs are loaded by dlopen... yes
>     checking for argz.h... no
>     checking for error_t... no
>     checking for argz_add... no
>     checking for argz_append... no
>     checking for argz_count... no
>     checking for argz_create_sep... no
>     checking for argz_insert... no
>     checking for argz_next... no
>     checking for argz_stringify... no
>     checking whether libtool supports -dlopen/-dlpreopen... no
>     checking for ltdl.h... no
>     checking where to find libltdl headers... -I$(top_srcdir)/libltdl
>     checking where to find libltdl library... $(top_build_prefix)libltdl/libltdlc.la
>     checking for unistd.h... (cached) yes
>     checking for dl.h... no
>     checking for sys/dl.h... no
>     checking for dld.h... no
>     checking for mach-o/dyld.h... no
>     checking for dirent.h... yes
>     checking for closedir... yes
>     checking for opendir... yes
>     checking for readdir... yes
>     checking for strlcat... no
>     checking for strlcpy... no
>     checking for pkg-config... /usr/bin/pkg-config
>     checking pkg-config is at least version 0.16... Could not load program pkg-config_64:
>     Symbol resolution failed for pkg-config_64 because:
>             Symbol g_strcmp0 (number 35) is not exported from dependent
>               module /usr/lib/libglib-2.0.a[libglib-2.0.so.0].
>             Symbol g_assertion_message_expr (number 48) is not exported from dependent
>               module /usr/lib/libglib-2.0.a[libglib-2.0.so.0].
>     Examine .loader section symbols with the 'dump -Tv' command.
>     no
>     checking for gcc... (cached) gcc
>     checking whether we are using the GNU C compiler... (cached) yes
>     checking whether gcc accepts -g... (cached) yes
>     checking for gcc option to accept ISO C89... (cached) none needed
>     checking whether gcc understands -c and -o together... (cached) yes
>     checking dependency style of gcc... (cached) gcc3
>     checking for flex... no
>     checking for lex... no
>     checking for bison... no
>     checking for byacc... no
>     checking whether ln -s works... yes
>     checking whether make sets $(MAKE)... (cached) yes
>     checking for cos in -lm... yes
>     checking for stdint.h... (cached) yes
>     checking for unistd.h... (cached) yes
>     checking sys/int_types.h usability... no
>     checking sys/int_types.h presence... no
>     checking for sys/int_types.h... no
>     checking for dlfcn.h... (cached) yes
>     checking for inttypes.h... (cached) yes
>     checking sys/inttypes.h usability... yes
>     checking sys/inttypes.h presence... yes
>     checking for sys/inttypes.h... yes
>     checking sys/times.h usability... yes
>     checking sys/times.h presence... yes
>     checking for sys/times.h... yes
>     checking for memory.h... (cached) yes
>     checking ndir.h usability... no
>     checking ndir.h presence... no
>     checking for ndir.h... no
>     checking for stdlib.h... (cached) yes
>     checking for strings.h... (cached) yes
>     checking for string.h... (cached) yes
>     checking sys/mman.h usability... yes
>     checking sys/mman.h presence... yes
>     checking for sys/mman.h... yes
>     checking sys/param.h usability... yes
>     checking sys/param.h presence... yes
>     checking for sys/param.h... yes
>     checking for sys/stat.h... (cached) yes
>     checking for sys/types.h... (cached) yes
>     checking malloc.h usability... yes
>     checking malloc.h presence... yes
>     checking for malloc.h... yes
>     checking poll.h usability... yes
>     checking poll.h presence... yes
>     checking for poll.h... yes
>     checking limits.h usability... yes
>     checking limits.h presence... yes
>     checking for limits.h... yes
>     checking sys/filio.h usability... no
>     checking sys/filio.h presence... no
>     checking for sys/filio.h... no
>     checking sys/uio.h usability... yes
>     checking sys/uio.h presence... yes
>     checking for sys/uio.h... yes
>     checking termios.h usability... yes
>     checking termios.h presence... yes
>     checking for termios.h... yes
>     checking stdbool.h usability... yes
>     checking stdbool.h presence... yes
>     checking for stdbool.h... yes
>     checking pwd.h usability... yes
>     checking pwd.h presence... yes
>     checking for pwd.h... yes
>     checking grp.h usability... yes
>     checking grp.h presence... yes
>     checking for grp.h... yes
>     checking sys/queue.h usability... yes
>     checking sys/queue.h presence... yes
>     checking for sys/queue.h... yes
>     checking sys/cdefs.h usability... yes
>     checking sys/cdefs.h presence... yes
>     checking for sys/cdefs.h... yes
>     checking syslog.h usability... yes
>     checking syslog.h presence... yes
>     checking for syslog.h... yes
>     checking pthread.h usability... yes
>     checking pthread.h presence... yes
>     checking for pthread.h... yes
>     checking for C/C++ restrict keyword... __restrict
>     checking for an ANSI C-conforming const... yes
>     checking for inline... inline
>     checking whether byte ordering is bigendian... yes
>     checking for a supported version of gcc... ok (6.3.0)
>     checking for gcc bug PR27603... ok, bug not present
>     checking for gcc bug PR26763-2... ok, bug not present
>     checking for valid code generation of CLI_ISCONTAINED... ok, bug not present
>     checking for gcc bug PR28045... ok, bug not present
>     checking for gcc bug PR37573... ok, bug not present
>     checking for off_t... yes
>     checking size of short... 2
>     checking size of int... 4
>     checking size of long... 8
>     checking size of long long... 8
>     checking size of void *... 8
>     checking for ld --version-script... no
>     checking whether uname(2) is POSIX... yes
>     checking for bind in -lsocket... no
>     checking for library containing gethostent... none required
>     checking for poll... yes
>     checking for setsid... yes
>     checking for memcpy... yes
>     checking for snprintf... yes
>     checking for vsnprintf... yes
>     checking for strerror_r... yes
>     checking for strlcpy... (cached) no
>     checking for strlcat... (cached) no
>     checking for strcasestr... no
>     checking for inet_ntop... yes
>     checking for setgroups... yes
>     checking for initgroups... yes
>     checking for ctime_r... yes
>     checking for mkstemp... yes
>     checking for mallinfo... yes
>     checking for madvise... yes
>     checking for getnameinfo... yes
>     checking for strndup... yes
>     checking for strnlen... yes
>     checking for strnstr... no
>     checking for _LARGEFILE_SOURCE value needed for large files... no
>     checking for working mmap... yes
>     checking for sysconf(_SC_PAGESIZE)... yes
>     checking for getpagesize()... yes
>     checking for MAP_ANON(YMOUS)... MAP_ANONYMOUS
>     checking for enable_extended_FILE_stdio... no
>     checking for timegm... no
>     checking for sysctlbyname... no
>     checking for CHECK... no
>     checking for ld used by GCC... /usr/bin/ld
>     checking if the linker (/usr/bin/ld) is GNU ld... no
>     checking for shared library run path origin... done
>     checking check.h usability... no
>     checking check.h presence... no
>     checking for check.h... no
>     configure: unable to compile/link with check
>     checking for libxml2 installation... not found
>     configure: ****** libxml2 support unavailable
>     checking for OpenSSL installation... checking for CRYPTO_free in -lcrypto... yes
>     checking for X509_VERIFY_PARAM_new in -lssl... yes
>     checking for libjson installation... checking for pcre2-config... no
>     checking for pcre-config... /usr/bin/pcre-config
>     checking pcre-config version... 8.33
>     configure: WARNING: pcre (original) detected. We recommend upgrading from pcre to pcre2 10.30 or later: http://www.pcre.org.
>     checking for CVE-2017-7186... configure: WARNING: The installed pcre version may contain security bugs. Please upgrade to 8.41+
>     or _preferably_ install pcre2 10.30+: http://www.pcre.org.
>     configure: CFLAGS from pcre-config: -I/opt/freeware/include
>     configure: LIBS from pcre-config: -L/opt/freeware/lib -lpcre
>     checking pcre.h usability... yes
>     checking pcre.h presence... yes
>     checking for pcre.h... yes
>     checking for pcre_compile in -lpcre... yes
>     configure: Compiling and linking with pcre from /opt/freeware
>     checking whether to enable maintainer-specific portions of Makefiles... no
>     checking for zlib installation... /usr
>     checking for inflateEnd in -lz... yes
>     checking for gzopen in -lz... yes
>     checking how to link with libbz2... -lbz2
>     checking for BZ2_bzDecompressInit in -lbz2... yes
>     checking bzlib.h usability... yes
>     checking bzlib.h presence... yes
>     checking for bzlib.h... yes
>     checking for CVE-2008-1372... ok
>     checking for CVE-2010-0405... ok
>     checking for getaddrinfo... yes
>     checking for SYSTEMD... no
>     checking for SYSTEMD... no
>     systemd is not supported
>     ./configure[24337]: --variable=systemdsystemunitdir:  not found
>     checking for systemd system unit installation directory... no
>     checking for IPv6 support... yes
>     checking for resolv.h... yes
>     checking for dn_expand in std libs... yes
>     checking whether setpgrp takes no argument... yes
>     checking for libiconv_open in -liconv... yes
>     checking for iconv... yes
>     checking for pthread.h... (cached) yes
>     checking whether in_port_t is defined... yes
>     checking for in_addr_t definition... yes
>     checking for sched_yield... yes
>     checking for pthread_yield... no
>     checking for readdir_r... support disabled
>     checking for ctime_r... yes, and it takes 2 arguments
>     checking for socklen_t... yes
>     checking for structure packing via __attribute__((packed))... yes
>     checking for type aligning via __attribute__((aligned))... yes
>     checking that structure packing works... yes
>     checking for fd_set... yes, found in sys/select.h
>     checking default FD_SETSIZE value... 65534
>     checking stat64... yes
>     checking whether signed right shift is sign extended... yes
>     checking for recvmsg... yes
>     checking for sendmsg... yes
>     checking for msg_control field in struct msghdr... yes
>     checking BSD 4.4 / RFC2292 style fd passing... yes
>     checking ncurses/ncurses.h usability... no
>     checking ncurses/ncurses.h presence... no
>     checking for ncurses/ncurses.h... no
>     configure: unable to compile/link with ncurses
>     checking ncurses.h usability... no
>     checking ncurses.h presence... no
>     checking for ncurses.h... no
>     configure: unable to compile/link with ncurses
>     checking curses.h usability... yes
>     checking curses.h presence... yes
>     checking for curses.h... yes
>     checking linking with pdcurses... configure: unable to compile/link with pdcurses
>     configure: WARNING: ****** not building clamdtop: ncurses not found
>     checking for llvm-config... no
>     checking LFS safe fts implementation... no
>     checking for libcurl installation... configure: WARNING: libcurl not found or not requested by ./configure. Please use the web i
>     nterface for submitting FPs/FNs.
>     checking for special C compiler options needed for large files... no
>     checking for _FILE_OFFSET_BITS value needed for large files... no
>     checking for sys/int_types.h... (cached) no
>     checking for inttypes.h... (cached) yes
>     checking that generated files are newer than configure... done
>     configure: creating ./config.status
>     config.status: creating libltdl/Makefile
>     config.status: creating clamscan/Makefile
>     config.status: creating database/Makefile
>     config.status: creating docs/Makefile
>     config.status: creating clamd/Makefile
>     config.status: creating clamd/clamav-daemon.service
>     config.status: creating clamd/clamav-daemon.socket
>     config.status: creating clamdscan/Makefile
>     config.status: creating clamsubmit/Makefile
>     config.status: creating clamav-milter/Makefile
>     config.status: creating freshclam/clamav-freshclam.service
>     config.status: creating freshclam/Makefile
>     config.status: creating sigtool/Makefile
>     config.status: creating clamconf/Makefile
>     config.status: creating etc/Makefile
>     config.status: creating test/Makefile
>     config.status: creating unit_tests/Makefile
>     config.status: creating fuzz/Makefile
>     config.status: creating clamdtop/Makefile
>     config.status: creating clambc/Makefile
>     config.status: creating libfreshclam/Makefile
>     config.status: creating Makefile
>     config.status: creating clamav-config
>     config.status: creating libclamav.pc
>     config.status: creating platform.h
>     config.status: creating docs/man/clamav-milter.8
>     config.status: creating docs/man/clamav-milter.conf.5
>     config.status: creating docs/man/clambc.1
>     config.status: creating docs/man/clamconf.1
>     config.status: creating docs/man/clamd.8
>     config.status: creating docs/man/clamd.conf.5
>     config.status: creating docs/man/clamdscan.1
>     config.status: creating docs/man/clamscan.1
>     config.status: creating docs/man/freshclam.1
>     config.status: creating docs/man/freshclam.conf.5
>     config.status: creating docs/man/sigtool.1
>     config.status: creating docs/man/clamdtop.1
>     config.status: creating docs/man/clamsubmit.1
>     config.status: creating clamav-types.h
>     config.status: creating clamav-config.h
>     config.status: clamav-config.h is unchanged
>     config.status: creating libclammspack/config.h
>     config.status: libclammspack/config.h is unchanged
>     config.status: executing depfiles commands
>     config.status: executing libtool commands
>     checking that generated files are newer than configure... done
>     configure: creating ./config.status
>     config.status: creating libltdl/Makefile
>     config.status: creating clamscan/Makefile
>     config.status: creating database/Makefile
>     config.status: creating docs/Makefile
>     config.status: creating clamd/Makefile
>     config.status: creating clamd/clamav-daemon.service
>     config.status: creating clamd/clamav-daemon.socket
>     config.status: creating clamdscan/Makefile
>     config.status: creating clamsubmit/Makefile
>     config.status: creating clamav-milter/Makefile
>     config.status: creating freshclam/clamav-freshclam.service
>     config.status: creating freshclam/Makefile
>     config.status: creating sigtool/Makefile
>     config.status: creating clamconf/Makefile
>     config.status: creating etc/Makefile
>     config.status: creating test/Makefile
>     config.status: creating unit_tests/Makefile
>     config.status: creating fuzz/Makefile
>     config.status: creating clamdtop/Makefile
>     config.status: creating clambc/Makefile
>     config.status: creating libfreshclam/Makefile
>     config.status: creating Makefile
>     config.status: creating clamav-config
>     config.status: creating libclamav.pc
>     config.status: creating platform.h
>     config.status: creating docs/man/clamav-milter.8
>     config.status: creating docs/man/clamav-milter.conf.5
>     config.status: creating docs/man/clambc.1
>     config.status: creating docs/man/clamconf.1
>     config.status: creating docs/man/clamd.8
>     config.status: creating docs/man/clamd.conf.5
>     config.status: creating docs/man/clamdscan.1
>     config.status: creating docs/man/clamscan.1
>     config.status: creating docs/man/freshclam.1
>     config.status: creating docs/man/freshclam.conf.5
>     config.status: creating docs/man/sigtool.1
>     config.status: creating docs/man/clamdtop.1
>     config.status: creating docs/man/clamsubmit.1
>     config.status: creating clamav-types.h
>     config.status: creating libclamav/Makefile
>     config.status: creating clamav-config.h
>     config.status: clamav-config.h is unchanged
>     config.status: creating libclammspack/config.h
>     config.status: libclammspack/config.h is unchanged
>     config.status: executing depfiles commands
>     config.status: executing libtool commands
>     configure: Summary of detected features follows
>                   OS          : aix6.1.0.0
>                   pthreads    : yes (-lpthread)
>     configure: Summary of miscellaneous features
>                   check       : no (auto)
>                   fanotify    : no (disabled)
>                   fdpassing   : 1
>                   IPv6        : yes
>     configure: Summary of optional tools
>                   clamdtop    :  (auto)
>                   milter      : yes (disabled)
>                   clamsubmit  : no (missing libjson-c-dev AND libcurl-devel. Use the website to submit FPs/FNs.) (disabled)
>     configure: Summary of engine performance features
>                   release mode: yes
>                   llvm        : no (disabled)
>                   mempool     : yes
>     configure: Summary of engine detection features
>                   bzip2       : ok
>                   zlib        : /usr
>                   unrar       : yes
>                   preclass    : no (missing libjson-c-dev) (disabled)
>                   pcre        : /opt/freeware
>                   libmspack   : yes (Internal)
>                   libxml2     : no
>                   yara        : yes
>                   fts         : yes (internal, libc's is not LFS compatible)
>     configure: WARNING:
>     ****** WARNING:
>     ****** You are cross compiling to a different host or you are
>     ****** linking to bugged system libraries or you have manually
>     ****** disabled important configure checks.
>     ****** Please be aware that this build may be badly broken.
>     ****** DO NOT REPORT BUGS BASED ON THIS BUILD !!!
>     
>     4.export OBJEC_MODE=64
>     5.make
>     
>     # make
>             make  all-recursive
>     Making all in libltdl
>       GEN      libltdl/lt__argz.h
>             make  all-am
>       CC       dlopen.lo
>       CCLD     dlopen.la
>       CC       libltdlc_la-preopen.lo
>       CC       libltdlc_la-lt__alloc.lo
>       CC       libltdlc_la-lt_dlloader.lo
>       CC       libltdlc_la-lt_error.lo
>       CC       libltdlc_la-ltdl.lo
>       CC       libltdlc_la-slist.lo
>       CC       lt__argz.lo
>       CC       lt__strl.lo
>       CCLD     libltdlc.la
>     libtool:   error: not configured to extract global symbols from dlpreopened files
>     Target "all-am" is up to date.
>     Making all in libclamav
>             make  all-recursive
>       CXX      libclamunrar_la-archive.lo
>       CXX      libclamunrar_la-arcread.lo
>       CXX      libclamunrar_la-blake2s.lo
>       CXX      libclamunrar_la-cmddata.lo
>       CXX      libclamunrar_la-consio.lo
>       CXX      libclamunrar_la-crc.lo
>       CXX      libclamunrar_la-crypt.lo
>       CXX      libclamunrar_la-dll.lo
>       CXX      libclamunrar_la-encname.lo
>       CXX      libclamunrar_la-errhnd.lo
>       CXX      libclamunrar_la-extinfo.lo
>       CXX      libclamunrar_la-extract.lo
>       CXX      libclamunrar_la-filcreat.lo
>       CXX      libclamunrar_la-file.lo
>       CXX      libclamunrar_la-filefn.lo
>       CXX      libclamunrar_la-filestr.lo
>       CXX      libclamunrar_la-find.lo
>       CXX      libclamunrar_la-getbits.lo
>       CXX      libclamunrar_la-global.lo
>       CXX      libclamunrar_la-hash.lo
>       CXX      libclamunrar_la-headers.lo
>       CXX      libclamunrar_la-isnt.lo
>       CXX      libclamunrar_la-list.lo
>       CXX      libclamunrar_la-match.lo
>       CXX      libclamunrar_la-options.lo
>       CXX      libclamunrar_la-pathfn.lo
>       CXX      libclamunrar_la-qopen.lo
>       CXX      libclamunrar_la-rar.lo
>       CXX      libclamunrar_la-rarvm.lo
>       CXX      libclamunrar_la-rawread.lo
>       CXX      libclamunrar_la-rdwrfn.lo
>       CXX      libclamunrar_la-recvol.lo
>       CXX      libclamunrar_la-resource.lo
>       CXX      libclamunrar_la-rijndael.lo
>       CXX      libclamunrar_la-rs.lo
>       CXX      libclamunrar_la-rs16.lo
>       CXX      libclamunrar_la-scantree.lo
>       CXX      libclamunrar_la-secpassword.lo
>       CXX      libclamunrar_la-sha1.lo
>       CXX      libclamunrar_la-sha256.lo
>       CXX      libclamunrar_la-smallfn.lo
>       CXX      libclamunrar_la-strfn.lo
>       CXX      libclamunrar_la-strlist.lo
>       CXX      libclamunrar_la-system.lo
>       CXX      libclamunrar_la-threadpool.lo
>       CXX      libclamunrar_la-timefn.lo
>       CXX      libclamunrar_la-ui.lo
>       CXX      libclamunrar_la-unicode.lo
>       CXX      libclamunrar_la-unpack.lo
>       CXX      libclamunrar_la-volume.lo
>       CXXLD    libclamunrar.la
>       CXX      unrar_iface.lo
>       CXXLD    libclamunrar_iface.la
>       CC       libclammspack_la-cabc.lo
>       CC       libclammspack_la-cabd.lo
>       CC       libclammspack_la-chmc.lo
>       CC       libclammspack_la-chmd.lo
>       CC       libclammspack_la-crc32.lo
>       CC       libclammspack_la-hlpc.lo
>       CC       libclammspack_la-hlpd.lo
>       CC       libclammspack_la-kwajc.lo
>       CC       libclammspack_la-kwajd.lo
>       CC       libclammspack_la-litc.lo
>       CC       libclammspack_la-litd.lo
>       CC       libclammspack_la-lzssd.lo
>       CC       libclammspack_la-lzxc.lo
>       CC       libclammspack_la-lzxd.lo
>       CC       libclammspack_la-mszipc.lo
>       CC       libclammspack_la-mszipd.lo
>       CC       libclammspack_la-oabc.lo
>       CC       libclammspack_la-oabd.lo
>       CC       libclammspack_la-qtmd.lo
>       CC       libclammspack_la-system.lo
>       CC       libclammspack_la-szddc.lo
>       CC       libclammspack_la-szddd.lo
>       CCLD     libclammspack.la
>       CC       libclamav_la-matcher-ac.lo
>       CC       libclamav_la-matcher-bm.lo
>       CC       libclamav_la-matcher-hash.lo
>       CC       libclamav_la-matcher.lo
>       CC       libclamav_la-others.lo
>       CC       libclamav_la-readdb.lo
>       CC       libclamav_la-cvd.lo
>       CC       libclamav_la-dsig.lo
>       CC       libclamav_la-scanners.lo
>       CC       libclamav_la-textdet.lo
>       CC       libclamav_la-filetypes.lo
>       CC       libclamav_la-rtf.lo
>       CC       libclamav_la-blob.lo
>       CC       libclamav_la-mbox.lo
>       CC       libclamav_la-message.lo
>       CC       libclamav_la-table.lo
>       CC       libclamav_la-text.lo
>       CC       libclamav_la-ole2_extract.lo
>       CC       libclamav_la-vba_extract.lo
>       CC       libclamav_la-msexpand.lo
>       CC       libclamav_la-pe.lo
>       CC       libclamav_la-pe_icons.lo
>       CC       libclamav_la-disasm.lo
>       CC       libclamav_la-upx.lo
>       CC       libclamav_la-htmlnorm.lo
>       CC       libclamav_la-libmspack.lo
>       CC       libclamav_la-rebuildpe.lo
>       CC       libclamav_la-petite.lo
>       CC       libclamav_la-wwunpack.lo
>       CC       libclamav_la-unsp.lo
>       CC       libclamav_la-aspack.lo
>       CC       libclamav_la-packlibs.lo
>       CC       libclamav_la-fsg.lo
>       CC       libclamav_la-mew.lo
>     mew.c: In function 'lzma_486248':
>     mew.c:122:18: warning: passing argument 1 of 'cli_writeint32' discards 'const' qualifier from pointer target type [-Wdiscarded-q
>     ualifiers]
>        cli_writeint32(*old_ecx, loc_ecx);
>                       ^
>     In file included from matcher.h:29:0,
>                      from others.h:22,
>                      from pe.h:30,
>                      from mew.c:53:
>     others.h:632:24: note: expected 'void *' but argument is of type 'const char *'
>          static inline void cli_writeint32(void *offset, uint32_t value)
>                             ^~~~~~~~~~~~~~
>     mew.c:136:18: warning: passing argument 1 of 'cli_writeint32' discards 'const' qualifier from pointer target type [-Wdiscarded-q
>     ualifiers]
>        cli_writeint32(*old_ecx, loc_ecx);
>                       ^
>     In file included from matcher.h:29:0,
>                      from others.h:22,
>                      from pe.h:30,
>                      from mew.c:53:
>     others.h:632:24: note: expected 'void *' but argument is of type 'const char *'
>          static inline void cli_writeint32(void *offset, uint32_t value)
>                             ^~~~~~~~~~~~~~
>       CC       libclamav_la-upack.lo
>       CC       libclamav_la-line.lo
>       CC       libclamav_la-untar.lo
>       CC       libclamav_la-unzip.lo
>       CC       libclamav_la-ooxml.lo
>       CC       libclamav_la-inflate64.lo
>       CC       libclamav_la-special.lo
>       CC       libclamav_la-binhex.lo
>       CC       libclamav_la-is_tar.lo
>       CC       libclamav_la-tnef.lo
>       CC       libclamav_la-autoit.lo
>       CC       libclamav_la-unarj.lo
>       CC       libclamav_la-bzlib.lo
>       CC       libclamav_la-nulsft.lo
>       CC       libclamav_la-infblock.lo
>       CC       libclamav_la-pdf.lo
>       CC       libclamav_la-pdfng.lo
>       CC       libclamav_la-pdfdecode.lo
>       CC       libclamav_la-spin.lo
>       CC       libclamav_la-yc.lo
>       CC       libclamav_la-elf.lo
>       CC       libclamav_la-sis.lo
>       CC       libclamav_la-uuencode.lo
>       CC       libclamav_la-phishcheck.lo
>       CC       libclamav_la-phish_domaincheck_db.lo
>       CC       libclamav_la-phish_whitelist.lo
>       CC       libclamav_la-regex_list.lo
>       CC       libclamav_la-regex_suffix.lo
>       CC       libclamav_la-entconv.lo
>       CC       libclamav_la-hashtab.lo
>       CC       libclamav_la-dconf.lo
>       CC       libclamav_la-lzma_iface.lo
>       CC       libclamav_la-7z_iface.lo
>       CC       libclamav_la-7zAlloc.lo
>       CC       libclamav_la-7zBuf.lo
>       CC       libclamav_la-7zBuf2.lo
>       CC       libclamav_la-7zCrc.lo
>       CC       libclamav_la-7zDec.lo
>       CC       libclamav_la-7zFile.lo
>       CC       libclamav_la-7zIn.lo
>       CC       libclamav_la-7zStream.lo
>       CC       libclamav_la-Bcj2.lo
>       CC       libclamav_la-Bra.lo
>       CC       libclamav_la-Bra86.lo
>       CC       libclamav_la-Lzma2Dec.lo
>       CC       libclamav_la-LzmaDec.lo
>       CC       libclamav_la-Ppmd7.lo
>       CC       libclamav_la-Ppmd7Dec.lo
>       CC       libclamav_la-Xz.lo
>       CC       libclamav_la-XzCrc64.lo
>       CC       libclamav_la-XzDec.lo
>       CC       libclamav_la-XzIn.lo
>       CC       libclamav_la-Delta.lo
>       CC       libclamav_la-BraIA64.lo
>       CC       libclamav_la-CpuArch.lo
>       CC       libclamav_la-7zCrcOpt.lo
>       CC       libclamav_la-explode.lo
>       CC       libclamav_la-textnorm.lo
>       CC       libclamav_la-dlp.lo
>       CC       libclamav_la-js-norm.lo
>       CC       libclamav_la-uniq.lo
>       GEN      version.h.tmp
>       GEN      version.h
>       CC       libclamav_la-version.lo
>       CC       libclamav_la-mpool.lo
>       CC       libclamav_la-filtering.lo
>       CC       libclamav_la-fmap.lo
>       CC       libclamav_la-perflogging.lo
>       CC       libclamav_la-bytecode.lo
>       CC       libclamav_la-bytecode_vm.lo
>       CC       libclamav_la-cpio.lo
>       CC       libclamav_la-macho.lo
>       CC       libclamav_la-ishield.lo
>       CC       libclamav_la-bytecode_api.lo
>       CC       libclamav_la-bytecode_api_decl.lo
>       CC       libclamav_la-cache.lo
>       CC       libclamav_la-bytecode_detect.lo
>       CC       libclamav_la-events.lo
>       CC       libclamav_la-adc.lo
>       CC       libclamav_la-dmg.lo
>       CC       libclamav_la-xar.lo
>       CC       libclamav_la-xdp.lo
>       CC       libclamav_la-mbr.lo
>       CC       libclamav_la-gpt.lo
>       CC       libclamav_la-apm.lo
>       CC       libclamav_la-prtn_intxn.lo
>       CC       libclamav_la-json_api.lo
>       CC       libclamav_la-xz_iface.lo
>       CC       libclamav_la-sf_base64decode.lo
>       CC       libclamav_la-hfsplus.lo
>       CC       libclamav_la-swf.lo
>       CC       libclamav_la-jpeg.lo
>       CC       libclamav_la-png.lo
>       CC       libclamav_la-iso9660.lo
>       CC       libclamav_la-arc4.lo
>       CC       libclamav_la-rijndael.lo
>       CC       libclamav_la-crtmgr.lo
>       CC       libclamav_la-asn1.lo
>       CC       libclamav_la-fpu.lo
>       CC       libclamav_la-stats.lo
>       CC       libclamav_la-www.lo
>       CC       libclamav_la-stats_json.lo
>       CC       libclamav_la-hostid.lo
>     In file included from ../libclamav/yara_clam.h:43:0,
>                      from ../libclamav/others.h:58,
>                      from ../libclamav/matcher.h:29,
>                      from ../libclamav/others.h:22,
>                      from hostid.c:63:
>     ../shared/queue.h:448:0: warning: "LIST_INIT" redefined
>      #define LIST_INIT(head) do {      \
>     
>     In file included from /usr/include/net/if.h:129:0,
>                      from /usr/include/sys/cdli.h:42,
>                      from /usr/include/sys/ndd_var.h:35,
>                      from hostid.c:52:
>     /usr/include/sys/queue.h:103:0: note: this is the location of the previous definition
>      #define LIST_INIT(head) {      \
>     
>     In file included from ../libclamav/yara_clam.h:43:0,
>                      from ../libclamav/others.h:58,
>                      from ../libclamav/matcher.h:29,
>                      from ../libclamav/others.h:22,
>                      from hostid.c:63:
>     ../shared/queue.h:452:0: warning: "LIST_INSERT_AFTER" redefined
>      #define LIST_INSERT_AFTER(listelm, elm, field) do {   \
>     
>     In file included from /usr/include/net/if.h:129:0,
>                      from /usr/include/sys/cdli.h:42,
>                      from /usr/include/sys/ndd_var.h:35,
>                      from hostid.c:52:
>     /usr/include/sys/queue.h:107:0: note: this is the location of the previous definition
>      #define LIST_INSERT_AFTER(listelm, elm, field) {   \
>     
>     In file included from ../libclamav/yara_clam.h:43:0,
>                      from ../libclamav/others.h:58,
>                      from ../libclamav/matcher.h:29,
>                      from ../libclamav/others.h:22,
>                      from hostid.c:63:
>     ../shared/queue.h:469:0: warning: "LIST_INSERT_HEAD" redefined
>      #define LIST_INSERT_HEAD(head, elm, field) do {    \
>     
>     In file included from /usr/include/net/if.h:129:0,
>                      from /usr/include/sys/cdli.h:42,
>                      from /usr/include/sys/ndd_var.h:35,
>                      from hostid.c:52:
>     /usr/include/sys/queue.h:115:0: note: this is the location of the previous definition
>      #define LIST_INSERT_HEAD(head, elm, field) {    \
>     
>     In file included from ../libclamav/yara_clam.h:43:0,
>                      from ../libclamav/others.h:58,
>                      from ../libclamav/matcher.h:29,
>                      from ../libclamav/others.h:22,
>                      from hostid.c:63:
>     ../shared/queue.h:622:0: warning: "TAILQ_INIT" redefined
>      #define TAILQ_INIT(head) do {      \
>     
>     In file included from /usr/include/net/if.h:129:0,
>                      from /usr/include/sys/cdli.h:42,
>                      from /usr/include/sys/ndd_var.h:35,
>                      from hostid.c:52:
>     /usr/include/sys/queue.h:147:0: note: this is the location of the previous definition
>      #define TAILQ_INIT(head) {      \
>     
>       CC       libclamav_la-openioc.lo
>       CC       libclamav_la-msdoc.lo
>       CC       libclamav_la-matcher-pcre.lo
>       CC       libclamav_la-regex_pcre.lo
>       CC       libclamav_la-msxml.lo
>       CC       libclamav_la-msxml_parser.lo
>       CC       libclamav_la-tiff.lo
>       CC       libclamav_la-hwp.lo
>       CC       libclamav_la-lzwdec.lo
>       CC       libclamav_la-matcher-byte-comp.lo
>       CC       libclamav_la-yara_arena.lo
>       CC       libclamav_la-yara_compiler.lo
>       CC       libclamav_la-yara_exec.lo
>       CC       libclamav_la-yara_hash.lo
>       CC       libclamav_la-yara_grammar.lo
>       CC       libclamav_la-yara_lexer.lo
>       CC       libclamav_la-yara_parser.lo
>       CC       libclamav_la-fp_add.lo
>       CC       libclamav_la-fp_add_d.lo
>       CC       libclamav_la-fp_addmod.lo
>       CC       libclamav_la-fp_cmp.lo
>       CC       libclamav_la-fp_cmp_d.lo
>       CC       libclamav_la-fp_cmp_mag.lo
>       CC       libclamav_la-fp_sub.lo
>       CC       libclamav_la-fp_sub_d.lo
>       CC       libclamav_la-fp_submod.lo
>       CC       libclamav_la-s_fp_add.lo
>       CC       libclamav_la-s_fp_sub.lo
>       CC       libclamav_la-fp_radix_size.lo
>       CC       libclamav_la-fp_read_radix.lo
>       CC       libclamav_la-fp_read_signed_bin.lo
>       CC       libclamav_la-fp_read_unsigned_bin.lo
>       CC       libclamav_la-fp_reverse.lo
>       CC       libclamav_la-fp_s_rmap.lo
>       CC       libclamav_la-fp_signed_bin_size.lo
>       CC       libclamav_la-fp_to_signed_bin.lo
>       CC       libclamav_la-fp_to_unsigned_bin.lo
>       CC       libclamav_la-fp_toradix.lo
>       CC       libclamav_la-fp_toradix_n.lo
>       CC       libclamav_la-fp_unsigned_bin_size.lo
>       CC       libclamav_la-fp_cnt_lsb.lo
>       CC       libclamav_la-fp_count_bits.lo
>       CC       libclamav_la-fp_div_2.lo
>       CC       libclamav_la-fp_div_2d.lo
>       CC       libclamav_la-fp_lshd.lo
>       CC       libclamav_la-fp_mod_2d.lo
>       CC       libclamav_la-fp_rshd.lo
>       CC       libclamav_la-fp_div.lo
>       CC       libclamav_la-fp_div_d.lo
>       CC       libclamav_la-fp_mod.lo
>       CC       libclamav_la-fp_mod_d.lo
>       CC       libclamav_la-fp_2expt.lo
>       CC       libclamav_la-fp_exptmod.lo
>       CC       libclamav_la-fp_ident.lo
>       CC       libclamav_la-fp_set.lo
>       CC       libclamav_la-fp_montgomery_calc_normalization.lo
>       CC       libclamav_la-fp_montgomery_reduce.lo
>       CC       libclamav_la-fp_montgomery_setup.lo
>       CC       libclamav_la-fp_mul.lo
>       CC       libclamav_la-fp_mul_comba.lo
>       CC       libclamav_la-fp_mul_2.lo
>       CC       libclamav_la-fp_mul_2d.lo
>       CC       libclamav_la-fp_mul_comba_12.lo
>       CC       libclamav_la-fp_mul_comba_17.lo
>       CC       libclamav_la-fp_mul_comba_20.lo
>       CC       libclamav_la-fp_mul_comba_24.lo
>       CC       libclamav_la-fp_mul_comba_28.lo
>       CC       libclamav_la-fp_mul_comba_3.lo
>       CC       libclamav_la-fp_mul_comba_32.lo
>       CC       libclamav_la-fp_mul_comba_4.lo
>       CC       libclamav_la-fp_mul_comba_48.lo
>       CC       libclamav_la-fp_mul_comba_6.lo
>       CC       libclamav_la-fp_mul_comba_64.lo
>       CC       libclamav_la-fp_mul_comba_7.lo
>       CC       libclamav_la-fp_mul_comba_8.lo
>       CC       libclamav_la-fp_mul_comba_9.lo
>       CC       libclamav_la-fp_mul_comba_small_set.lo
>       CC       libclamav_la-fp_mul_d.lo
>       CC       libclamav_la-fp_mulmod.lo
>       CC       libclamav_la-fp_invmod.lo
>       CC       libclamav_la-fp_sqr.lo
>       CC       libclamav_la-fp_sqr_comba_12.lo
>       CC       libclamav_la-fp_sqr_comba_17.lo
>       CC       libclamav_la-fp_sqr_comba_20.lo
>       CC       libclamav_la-fp_sqr_comba_24.lo
>       CC       libclamav_la-fp_sqr_comba_28.lo
>       CC       libclamav_la-fp_sqr_comba_3.lo
>       CC       libclamav_la-fp_sqr_comba_32.lo
>       CC       libclamav_la-fp_sqr_comba_4.lo
>       CC       libclamav_la-fp_sqr_comba_48.lo
>       CC       libclamav_la-fp_sqr_comba_6.lo
>       CC       libclamav_la-fp_sqr_comba_64.lo
>       CC       libclamav_la-fp_sqr_comba_7.lo
>       CC       libclamav_la-fp_sqr_comba_8.lo
>       CC       libclamav_la-fp_sqr_comba_9.lo
>       CC       libclamav_la-fp_sqr_comba_generic.lo
>       CC       libclamav_la-fp_sqr_comba_small_set.lo
>       CC       libclamav_la-fp_sqrmod.lo
>       CC       libclamav_nocxx_la-bytecode_nojit.lo
>       CCLD     libclamav_nocxx.la
>       CC       libclamav_internal_utils_la-str.lo
>       CC       libclamav_internal_utils_la-conv.lo
>       CC       libclamav_internal_utils_la-crypto.lo
>     crypto.c: In function 'cl_load_crl':
>     crypto.c:1143:2: warning: 'X509_CRL_get_nextUpdate' is deprecated [-Wdeprecated-declarations]
>       tme = X509_CRL_get_nextUpdate(x);
>       ^~~
>     In file included from /opt/freeware/include/openssl/x509_vfy.h:20:0,
>                      from /opt/freeware/include/openssl/x509.h:309,
>                      from /opt/freeware/include/openssl/ssl.h:50,
>                      from clamav.h:31,
>                      from crypto.c:60:
>     /opt/freeware/include/openssl/x509.h:709:1: note: declared here
>      DEPRECATEDIN_1_1_0(ASN1_TIME *X509_CRL_get_nextUpdate(X509_CRL *crl))
>      ^
>       CC       libclamav_internal_utils_la-iowrap.lo
>       CC       libclamav_internal_utils_la-others_common.lo
>       CC       libclamav_internal_utils_la-qsort.lo
>       CC       libclamav_internal_utils_la-strlcpy.lo
>       CC       libclamav_internal_utils_la-regcomp.lo
>       CC       libclamav_internal_utils_la-regerror.lo
>       CC       libclamav_internal_utils_la-regexec.lo
>       CC       libclamav_internal_utils_la-regfree.lo
>       CC       libclamav_internal_utils_la-strlcat.lo
>       CCLD     libclamav_internal_utils.la
>       CCLD     libclamav.la
>     libtool:   error: not configured to extract global symbols from dlpreopened files
>     ld: 0711-317 ERROR: Undefined symbol: lt_libltdlc_LTX_preloaded_symbols
>     ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
>     collect2: error: ld returned 8 exit status
>     make: The error code from the last command is 1.
>     
>     
>     Stop.
>     make: The error code from the last command is 1.
>     
>     
>     Stop.
>     make: The error code from the last command is 2.
>     
>     
>     Stop.
>     make: The error code from the last command is 1.
>     
>     
>     Stop.
>     make: The error code from the last command is 2.
>     
>     
>     Stop.
>     
>     Best regards.
>     
>     T.O
>     
>     
>     _______________________________________________
>     
>     clamav-users mailing list
>     clamav-users at lists.clamav.net
>     https://lists.clamav.net/mailman/listinfo/clamav-users
>     
>     
>     Help us build a comprehensive ClamAV guide:
>     https://github.com/vrtadmin/clamav-faq
>     
>     http://www.clamav.net/contact.html#ml
>     
> 
> 
> _______________________________________________
> 
> clamav-users mailing list
> clamav-users at lists.clamav.net
> https://lists.clamav.net/mailman/listinfo/clamav-users
> 
> 
> Help us build a comprehensive ClamAV guide:
> https://github.com/vrtadmin/clamav-faq
> 
> http://www.clamav.net/contact.html#ml




More information about the clamav-users mailing list