[clamav-users] Error loading libfreshclam.so.2 with ClamAV 102.1

[Micah Snyder (micasnyd)]

If you run `sudo ldconfig` does that resolve the issue?

-Micah

On 1/17/20, 2:30 PM, "clamav-users on behalf of Bowie Bailey" <clamav-users-bounces at lists.clamav.net on behalf of Bowie_Bailey at BUC.com> wrote:

    On 1/17/2020 1:39 PM, Matus UHLAR - fantomas wrote:
    >>> On 17.01.20 12:25, Bowie Bailey wrote:
    >>>> I just upgraded from ClamAV 101.4 to 102.1 on CentOS 7.4.  Clam runs fine (through
    >>>> avfilter for Courier), but when I run freshclam, I get an error:
    >>>>
    >>>> # freshclam
    >>>> freshclam: error while loading shared libraries: libfreshclam.so.2: cannot open
    >>>> shared object file: No such file or directory
    >>>>
    >>>> # ll /usr/local/lib64/libfreshclam.*
    >>>> -rwxr-xr-x. 1 root root   1134 Jan 17 12:01 /usr/local/lib64/libfreshclam.la
    >>>> lrwxrwxrwx. 1 root root     21 Jan 17 12:01 /usr/local/lib64/libfreshclam.so ->
    >>>> libfreshclam.so.2.0.0
    >>>> lrwxrwxrwx. 1 root root     21 Jan 17 12:01 /usr/local/lib64/libfreshclam.so.2 ->
    >>>> libfreshclam.so.2.0.0
    >>>> -rwxr-xr-x. 1 root root 481680 Jan 17 12:01 /usr/local/lib64/libfreshclam.so.2.0.0
    >
    >> On 1/17/2020 1:03 PM, Matus UHLAR - fantomas wrote:
    >>> uninstall system version of clamav.
    >>>
    >>> or, better, uninstall your version of clamav and get one from repository
    >>> that provides current clamav for centos7
    >
    > On 17.01.20 13:11, Bowie Bailey wrote:
    >> I don't have a system version of clamav.
    >>
    >> I had 101.4 installed and working (compiled from source).  I downloaded 102.1 from
    >> clamav.net and built it using the standard build procedure.  I have installed clam
    >> this way for years without any problems.
    >
    > was the 0.101.4 installed the same way as 0.102.1 ? Did you uninstall it before
    > installing 0.102.1?
    
    It was installed exactly the same way except for an extra --disable-clamonacc flag on
    ./configure.
    
    > there may be problem in the sandard build process of 0.102.1 for centos
    > try running ldd `which freshclam` and it should show where it searches for
    > libfreshclam
    
    Here are the first several lines:
    
    # ldd `which freshclam`
            linux-vdso.so.1 =>  (0x00007ffed21c6000)
            libssl.so.10 => /lib64/libssl.so.10 (0x00007f9a54ec6000)
            libcrypto.so.10 => /lib64/libcrypto.so.10 (0x00007f9a54a65000)
            libclamav.so.9 => /usr/local/lib64/libclamav.so.9 (0x00007f9a54689000)
            libfreshclam.so.2 => not found
            libresolv.so.2 => /lib64/libresolv.so.2 (0x00007f9a54470000)
            libcurl.so.4 => /lib64/libcurl.so.4 (0x00007f9a54206000)
            libz.so.1 => /lib64/libz.so.1 (0x00007f9a53ff0000)
           
    It says 'not found', but libfreshclam.so.2 lives in the same directory as the
    libclamav.so.9 that it did find.  The dates indicate that the file is part of the
    build that was installed today (same with the freshclam binary).  Is there something
    I can change on the build to specify the file location?
    
    > however, I prefer using installing from sane package maintainers.
    > I don't know how does the redhat (and thus centos) clamav support work, but
    > Debians's usually works perfectly
    
    I have always preferred to build ClamAV and SpamAssassin from source so I don't have
    to wait on the packages.  I just got a bit behind on ClamAV this time because I had
    to wait for avfilter to be updated to work with ClamAV 102.
    
    -- 
    Bowie
    
    
    _______________________________________________
    
    clamav-users mailing list
    clamav-users at lists.clamav.net
    https://lists.clamav.net/mailman/listinfo/clamav-users
    
    
    Help us build a comprehensive ClamAV guide:
    https://github.com/vrtadmin/clamav-faq
    
    http://www.clamav.net/contact.html#ml