[clamav-users] clamAV On-Access Scanning problem

[Micah Snyder (micasnyd)]

Curl is used for both TCP sockets and local unix sockets.

Outside of building a newer version of curl yourself, or installing using our RPM for ClamAV 0.104.1 from https://www.clamav.net/downloads, I don't have a good solution for you.

As Ged noted, other RHEL users on the list may have another recommendation.

Regards,
Micah

Micah Snyder
ClamAV Development
Talos
Cisco Systems, Inc.
________________________________
From: clamav-users <clamav-users-bounces at lists.clamav.net> on behalf of G.W. Haywood via clamav-users <clamav-users at lists.clamav.net>
Sent: Thursday, December 16, 2021 3:22 AM
To: Jonathan Prater via clamav-users <clamav-users at lists.clamav.net>
Cc: G.W. Haywood <clamav at jubileegroup.co.uk>
Subject: Re: [clamav-users] clamAV On-Access Scanning problem

Hi there,

On Wed, 15 Dec 2021, Jonathan Prater via clamav-users wrote:

> If I understand correctly, the curl requirement is solely to support file
> descriptor passing via a local Unix socket.  If I use a TCP socket
> (listening only on localhost) for clam, does that eliminate the curl
> requirement?

That's the way it reads.  Having said that I haven't used a Red Hat
system for nearly twenty years so YMMV.  There are probably RHEL users
on the mailing list, so if you're patient you might get a more useful
response from one of them or even from somebody at Sourcefire.

--

73,
Ged.

_______________________________________________

clamav-users mailing list
clamav-users at lists.clamav.net
https://lists.clamav.net/mailman/listinfo/clamav-users


Help us build a comprehensive ClamAV guide:
https://github.com/vrtadmin/clamav-faq

http://www.clamav.net/contact.html#ml
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clamav.net/pipermail/clamav-users/attachments/20211216/6805a7c3/attachment.htm>