I am running RHEL, Red Hat Enterprise Linux Server release 7.9 (Maipo). The output of “clamconf” below: By the way, I am running these commands from the clamav private mirror server.
[root@ip-10-64-205-168 bin]# clamconf
Checking configuration files in /etc
Config file: clamd.d/scan.conf
------------------------------
AlertExceedsMax disabled
PreludeEnable disabled
PreludeAnalyzerName disabled
LogFile = "/var/log/clamd.scan"
LogFileUnlock disabled
LogFileMaxSize = "10485760"
LogTime = "yes"
LogClean disabled
LogSyslog = "yes"
LogFacility = "LOG_LOCAL6"
LogVerbose = "yes"
LogRotate = "yes"
ExtendedDetectionInfo = "yes"
PidFile = "/var/run/clamd.scan/clamd.pid"
TemporaryDirectory disabled
DatabaseDirectory = "/var/www/html"
OfficialDatabaseOnly disabled
LocalSocket = "/var/run/clamd.scan/clamd.sock"
LocalSocketGroup disabled
LocalSocketMode disabled
FixStaleSocket = "yes"
TCPSocket = "3310"
TCPAddr = "127.0.0.1"
MaxConnectionQueueLength = "200"
StreamMaxLength = "26214400"
StreamMinPort = "1024"
StreamMaxPort = "2048"
MaxThreads = "10"
ReadTimeout = "120"
CommandReadTimeout = "30"
SendBufTimeout = "500"
MaxQueue = "100"
IdleTimeout = "30"
ExcludePath = "^/proc/", "^/sys/"
MaxDirectoryRecursion = "15"
FollowDirectorySymlinks disabled
FollowFileSymlinks disabled
CrossFilesystems = "yes"
SelfCheck = "600"
ConcurrentDatabaseReload = "yes"
DisableCache disabled
VirusEvent disabled
ExitOnOOM disabled
AllowAllMatchScan = "yes"
Foreground disabled
Debug disabled
LeaveTemporaryFiles disabled
User = "clamscan"
Bytecode = "yes"
BytecodeSecurity = "TrustSigned"
BytecodeTimeout = "10000"
BytecodeUnsigned disabled
BytecodeMode = "Auto"
DetectPUA disabled
ExcludePUA disabled
IncludePUA disabled
ScanPE = "yes"
ScanELF = "yes"
ScanMail disabled
ScanPartialMessages disabled
PhishingSignatures = "yes"
PhishingScanURLs = "yes"
HeuristicAlerts = "yes"
HeuristicScanPrecedence disabled
StructuredDataDetection disabled
StructuredMinCreditCardCount = "3"
StructuredMinSSNCount = "3"
StructuredSSNFormatNormal = "yes"
StructuredSSNFormatStripped disabled
ScanHTML = "yes"
ScanOLE2 = "yes"
AlertBrokenExecutables disabled
AlertBrokenMedia disabled
AlertEncrypted disabled
StructuredCCOnly disabled
AlertEncryptedArchive disabled
AlertEncryptedDoc disabled
AlertOLE2Macros disabled
AlertPhishingSSLMismatch disabled
AlertPhishingCloak disabled
AlertPartitionIntersection disabled
ScanPDF = "yes"
ScanSWF = "yes"
ScanXMLDOCS = "yes"
ScanHWP3 = "yes"
ScanArchive = "yes"
ForceToDisk disabled
MaxScanTime disabled
MaxScanSize = "104857600"
MaxFileSize = "26214400"
MaxRecursion = "16"
MaxFiles = "10000"
MaxEmbeddedPE = "10485760"
MaxHTMLNormalize = "10485760"
MaxHTMLNoTags = "2097152"
MaxScriptNormalize = "5242880"
MaxZipTypeRcg = "1048576"
MaxPartitions = "50"
MaxIconsPE = "100"
MaxRecHWP3 = "16"
PCREMatchLimit = "100000"
PCRERecMatchLimit = "2000"
PCREMaxFileSize = "26214400"
OnAccessMountPath = "/"
OnAccessIncludePath disabled
OnAccessExcludePath = "/proc", "/dev", "/sys", "/var/log"
OnAccessExcludeRootUID disabled
OnAccessExcludeUID disabled
OnAccessExcludeUname disabled
OnAccessMaxFileSize = "5242880"
OnAccessDisableDDD disabled
OnAccessPrevention = "yes"
OnAccessExtraScanning = "yes"
OnAccessCurlTimeout = "5000"
OnAccessMaxThreads = "5"
OnAccessRetryAttempts disabled
OnAccessDenyOnError disabled
DevACOnly disabled
DevACDepth disabled
DevPerformance disabled
DevLiblog disabled
DisableCertCheck disabled
AlgorithmicDetection = "yes"
BlockMax disabled
PhishingAlwaysBlockSSLMismatch disabled
PhishingAlwaysBlockCloak disabled
PartitionIntersection disabled
OLE2BlockMacros disabled
ArchiveBlockEncrypted disabled
Config file: freshclam.conf
---------------------------
LogFileMaxSize = "2097152"
LogTime = "yes"
LogSyslog = "yes"
LogFacility = "LOG_LOCAL6"
LogVerbose disabled
LogRotate = "yes"
PidFile = "/var/run/freshclam.pid"
DatabaseDirectory = "/var/www/html"
Foreground disabled
Debug disabled
UpdateLogFile = "/var/log/freshclam.log"
DatabaseOwner = "clamscan"
Checks = "24"
DNSDatabaseInfo = "current.cvd.clamav.net"
DatabaseMirror = "database.clamav.net"
PrivateMirror disabled
MaxAttempts = "3"
ScriptedUpdates disabled
TestDatabases = "yes"
CompressLocalDatabase disabled
ExtraDatabase disabled
ExcludeDatabase disabled
DatabaseCustomURL disabled
HTTPProxyServer = "proxy.service.cnqr.tech"
HTTPProxyPort = "3128"
HTTPProxyUsername disabled
HTTPProxyPassword disabled
HTTPUserAgent disabled
NotifyClamd = "/etc/clamd.d/scan.conf"
OnUpdateExecute disabled
OnErrorExecute disabled
OnOutdatedExecute disabled
LocalIPAddress disabled
ConnectTimeout = "300"
ReceiveTimeout disabled
Bytecode = "yes"
mail/clamav-milter.conf not found
Software settings
-----------------
Version: 0.103.2
Optional features supported: MEMPOOL IPv6 AUTOIT_EA06 BZIP2 LIBXML2 PCRE2 ICONV JSON
Database information
--------------------
Database directory: /var/www/html
daily.cvd: version 26211, sigs: 3992151, built on Thu Jun 24 11:04:24 2021
main.cvd: version 59, sigs: 4564902, built on Mon Nov 25 13:56:15 2019
bytecode.cvd: version 333, sigs: 92, built on Mon Mar 8 15:21:51 2021
Total number of signatures: 8557145
Platform information
--------------------
uname: Linux 3.10.0-1160.31.1.el7.x86_64 #1 SMP Wed May 26 20:18:08 UTC 2021 x86_64
OS: linux-gnu, ARCH: x86_64, CPU: x86_64
zlib version: 1.2.7 (1.2.7), compile flags: a9
platform id: 0x0a217b7b0800000002040805
Build information
-----------------
GNU C: 4.8.5 20150623 (Red Hat 4.8.5-44) (4.8.5)
CPPFLAGS: -I/usr/include/libprelude
CFLAGS: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -fno-strict-aliasing -D_LARGEFILE_SOURCE
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
CXXFLAGS: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic
LDFLAGS: -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -Wl,--as-needed -lprelude
Configure: '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--program-prefix=' '--disable-dependency-tracking' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share'
'--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/var/lib' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--enable-milter' '--disable-clamav' '--disable-static' '--disable-zlib-vcheck''--disable-unrar'
'--enable-id-check' '--enable-dns' '--with-dbdir=/var/lib/clamav' '--with-group=clamupdate' '--with-user=clamupdate' '--disable-rpath' '--disable-silent-rules' '--enable-clamdtop' '--enable-prelude' 'build_alias=x86_64-redhat-linux-gnu' 'host_alias=x86_64-redhat-linux-gnu'
'CXXFLAGS=-O2 -g-pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic' 'LDFLAGS=-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld
-Wl,--as-needed' 'CFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic' 'PKG_CONFIG_PATH=:/usr/lib64/pkgconfig:/usr/share/pkgconfig'
sizeof(void*) = 8
Engine flevel: 123, dconf: 123
From:
clamav-users <clamav-users-bounces@lists.clamav.net> on behalf of vze1amckv--- via clamav-users <clamav-users@lists.clamav.net>
Date: Thursday, June 24, 2021 at 8:32 PM
To: Lopez, Carmelo via clamav-users <clamav-users@lists.clamav.net>
Cc: vze1amckv@verizon.net <vze1amckv@verizon.net>
Subject: Re: [clamav-users] Unable to start clamd daemon
I apologize if the answer to my question is obvious from your original
post. Although I can see you're running it in the cloud, what
distribution/flavor/version of operating system are you using?
Meanwhile, please feel free to post the output of the "clamconf"
command. Thank you.
On 6/24/21 8:04 PM, Lopez, Carmelo via clamav-users wrote:
> Hello,
>
> I am new to clamav and I’ve completed installing a private mirror
> server. Freshclam works fine but when I try to start the clamd daemon I
> get this error. Any help is appreciated.
>
> systemctl status clamd@scan -l
>
> ● clamd@scan.service - clamd scanner (scan) daemon
>
> Loaded: loaded (/usr/lib/systemd/system/clamd@scan.service; enabled;
> vendor preset: disabled)
>
> Active: failed (Result: start-limit) since Thu 2021-06-24 23:21:13
> UTC; 41min ago
>
> Docs: man:clamd(8)
>
> man:clamd.conf(5)
>
> https://www.clamav.net/documents/
>
> Process: 2030 ExecStart=/usr/sbin/clamd -c /etc/clamd.d/%i.conf
> (code=exited, status=1/FAILURE)
>
> Jun 24 23:21:13 ip-10-64-205-168.us-west-2.compute.internal systemd[1]:
> clamd@scan.service: control process exited, code=exited status=1
>
> Jun 24 23:21:13 ip-10-64-205-168.us-west-2.compute.internal systemd[1]:
> Failed to start clamd scanner (scan) daemon.
>
> Jun 24 23:21:13 ip-10-64-205-168.us-west-2.compute.internal systemd[1]:
> Unit clamd@scan.service entered failed state.
>
> Jun 24 23:21:13 ip-10-64-205-168.us-west-2.compute.internal systemd[1]:
> clamd@scan.service failed.
>
> Jun 24 23:21:13 ip-10-64-205-168.us-west-2.compute.internal systemd[1]:
> clamd@scan.service holdoff time over, scheduling restart.
>
> Jun 24 23:21:13 ip-10-64-205-168.us-west-2.compute.internal systemd[1]:
> Stopped clamd scanner (scan) daemon.
>
> Jun 24 23:21:13 ip-10-64-205-168.us-west-2.compute.internal systemd[1]:
> start request repeated too quickly for clamd@scan.service
>
> Jun 24 23:21:13 ip-10-64-205-168.us-west-2.compute.internal systemd[1]:
> Failed to start clamd scanner (scan) daemon.
>
> Jun 24 23:21:13 ip-10-64-205-168.us-west-2.compute.internal systemd[1]:
> Unit clamd@scan.service entered failed state.
>
> Jun 24 23:21:13 ip-10-64-205-168.us-west-2.compute.internal systemd[1]:
> clamd@scan.service failed.
>
> *Carmelo Lopez*
>
> Access-CL-Concur US
>
> *Concur St. Louis Park (MN), *1550 Utica Avenue South, St. Louis Park
> 55416-5312, United States
>
> T +19529471714, M +16512602626, carmelo.lopez01@sap.com
> <mailto:carmelo.lopez01@sap.com>
>
> *Please consider the impact on the environment before printing this email.*
>
> signature_791736281
>
>
>
> _______________________________________________
>
> clamav-users mailing list
> clamav-users@lists.clamav.net
> https://lists.clamav.net/mailman/listinfo/clamav-users
>
>
> Help us build a comprehensive ClamAV guide:
> https://github.com/vrtadmin/clamav-faq
>
> http://www.clamav.net/contact.html#ml
>
_______________________________________________
clamav-users mailing list
clamav-users@lists.clamav.net
https://lists.clamav.net/mailman/listinfo/clamav-users
Help us build a comprehensive ClamAV guide:
https://github.com/vrtadmin/clamav-faq
http://www.clamav.net/contact.html#ml